Library › Hardware › Gears, cranks & flywheels ·

Rod-end yokes with a side stub pin: Ø5 tube and Ø3 rod

What yoke joins a rod end to a crank pin from the side? · Hardware · basis: Design values; Ø3 dowel (ISO 8734) stub pin, 623 con-rod eyes from the con-rod kit on this site

Also called: rod end yoke, side pin rod end, coaxial rod con-rod connection

Long Earth Society build part. The rod ends on my rolling-diaphragm engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • A small block on the rod end with a Ø3 dowel pressed 4.5 mm into its side: the con-rod's 623 runs on the 7.5 mm that stand out, beside the block, so the rod's axis stays free.
  • The tube yoke has a Ø3.4 passage above its Ø5 socket: in the beta the Ø3 displacer rod runs up through the power piston's tube rod and out of the top of this yoke to its own rod yoke.
  • Both hold their rod with an M3 grub.

Rod-end yokes with a side stub pin: Ø5 tube and Ø3 rod size chart

partsocket (mm)pin height (mm)height (mm)stub pin
rd-yoke-tube5Ø5 × 1217.021.0Ø3 × 12, 4.5 in
rd-yoke-rod3Ø3 × 1014.018.0Ø3 × 12, 4.5 in

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
tube socketØ5 × 12Ø5 tube rod (M3 grub)sliderd-yoke-tube5*
rod passageØ3.4Ø3 displacer rod (no contact)designedrd-yoke-tube5*
rod socketØ3 × 10Ø3 rod (M3 grub)sliderd-yoke-rod3*
stub-pin holeØ3 × 4.5Ø3 × 12 dowelpressall
grub holeØ2.5M3 tap drilldesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
rd-yoke-tube5tube-rod yoke 12 × 14 × 21: Ø5 socket 12 deep with an M3 grub (Ø2.5), Ø3.4 passage above it, Ø3 stub-pin hole 4.5 deep in the −Y face at 17STEP · STL
rd-yoke-rod3rod yoke 12 × 14 × 18: Ø3 socket 10 deep with an M3 grub (Ø2.5), Ø3 stub-pin hole 4.5 deep in the −Y face at 14STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=rod-end-yokes-side-pin

Rod-end yokes with a side stub pin: Ø5 tube and Ø3 rod, isometric render of a generated part
Render of rd-yoke-rod3 from the free STEP; not to scale.

Fits with

Questions

Why a stub pin instead of a clevis?

A clevis pin crosses the rod's axis; the beta needs a second rod to pass straight through, so the pin stands out to one side.