Library › Hardware › Pistons, cylinders & rods ·

Rods Ø6 × 356.7 and M6 × 83

What 6 mm rods go with a 10 inch tri-clamp piston? · Hardware · basis: Exact geometry from the engine layouts

Also called: stirling displacer rod length

Long Earth Society build part. Parts of the HTD engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
1 in table

Notes

  • Main: Ø6 × 356.7, from the displacer hub's socket through the cap's guide, the bored spool and the piston's centre bore to the clevis below the crank. The guide and the piston bore are running fits (see Mating features); the piston bore is also the bleed that lets the crankcase follow the working space's mean pressure.

Rods Ø6 × 356.7 and M6 × 83 size chart

partdiameter (mm)length (mm)
displacer-rod-6x357.56.0357.5

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
rodØ6cap guide and piston centre borerunall
endsM6 into the displacer; Ø6 into the clevis socket with an M4 grubdisplacer hub, rod clevispressall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
displacer-rod-6x357.5Ø6 × 357.5 displacer rod (main): M6 into the displacer hub, top in the clevis socketSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=rods-6mm-m6

Rods Ø6 × 356.7 and M6 × 83, isometric render of a generated part
Render of displacer-rod-6x357.5 from the free STEP; not to scale.

Fits with

Questions

What does the displacer rod pass through?

The cap's guide, the power cylinder and the piston's centre bore, to the clevis under the crank.