Library › Hardware › Gears, cranks & flywheels ·

Ross yoke crank disc Ø24, 6 mm throw

What crank disc drives a Ross yoke? · Hardware · basis: Solved Ross linkage: crank throw e = 6

Also called: ross yoke crank, 6 mm throw crank disc, crank disc 5 mm bore

Long Earth Society build part. The parallel-cylinder alpha, solved. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
5 in table

Notes

  • The crank that drives the Ross yoke: Ø24 × 6, Ø5 bore (fit: slide) for the crankshaft, Ø2.5 radial hole (M3 tap size) for the grub screw.
  • One Ø3 hole (fit: press) at 6 mm takes a Ø3 × 20 crank pin; the yoke's bottom vertex rides on it, and a 3 mm collar holds it on.

Ross yoke crank disc Ø24, 6 mm throw size chart

parametervalue
discØ24 × 6
boreØ5
throw6
pin holeØ3
grub holeØ2.5

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
crank-disc boreØ5Ø5 crankshaft (M3 grub)slideross-crank-disc-*
crank-disc pin holeØ3Ø3 crank pinpressross-crank-disc-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaRoss yokewebCC BY-SA 4.0 (text)
Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
ross-crank-disc-e6crank disc Ø24 × 6, Ø5 bore, Ø2.5 tap-drill hole for an M3 grub, Ø3 pin at 6 mm (the yoke rides on it)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=ross-crank-disc

Ross yoke crank disc Ø24, 6 mm throw, isometric render of a generated part
Render of ross-crank-disc-e6 from the free STEP; not to scale.

Questions

What throw does the Ross yoke crank have?

6 mm; with a = h = 20 it gives piston strokes of 17.0 and 17.2 mm.

How is the Ross crank disc fixed to the shaft?

An M3 grub in the Ø2.5 radial hole onto the Ø5 shaft's D-flat.