Library › Hardware › Gears, cranks & flywheels ·

Ross yoke rocking link, 40 mm

What rocking link goes with a Ross yoke? · Hardware · basis: Solved Ross linkage: rocking link 40 from the frame pivot at (−40, 20) to the yoke's top-middle pin

Also called: ross yoke rocking link, 40 mm link 3 mm holes, ross yoke link length

Long Earth Society build part. The parallel-cylinder alpha, solved. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
3 in table

Notes

  • The link that steadies the Ross yoke: 40 mm between Ø3 ends (fit: run), 48 × 8 × 5.
  • One end turns on the Ø3 × 20 pin in the frame post, the other on the pin in the yoke's top-middle; it runs in the front plane, outside the con-rods.

Ross yoke rocking link, 40 mm size chart

parametervalue
centres40
outline48 × 8 × 5
holes2 × Ø3 (run)

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
link and con-rod endsØ3Ø3 pins (turn on them)runrocking-link-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaRoss yokewebCC BY-SA 4.0 (text)
Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
rocking-link-40rocking link 40 mm, Ø3 ends (pins turn in them): frame post to the yoke's top-middle pin, in the front planeSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=ross-rocking-link

Ross yoke rocking link, 40 mm, isometric render of a generated part
Render of rocking-link-40 from the free STEP; not to scale.

Questions

What does the rocking link on a Ross yoke do?

It holds the yoke's top-middle on an arc about the frame post, so the yoke rocks instead of swinging freely on the crank pin.

Where does the rocking link pivot?

On a Ø3 pin in the frame post at (−40, 20) from the crank axis.