Library › Electronic components › Microcontroller boards ·

Seeed Studio XIAO ESP32S3 — board outline, castellated pads and USB-C position

What are the Seeed Studio XIAO ESP32S3 dimensions and where is the USB-C port? · Modern device · basis: Seeed Studio's XIAO ESP32S3 v1.1 dimensioning DXF (board outline and USB-C footprint) and the Seeed wiki.

Also called: xiao esp32s3, xiao sense, xiao esp32s3 sense, seeed xiao sense, seeed studio xiao esp32s3 sense, xiao esp32s3 dimensions, xiao esp32s3 size, seeed xiao esp32s3, 113991114

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
21.14 mm
width
17.78 mm
height
4.26 mm

Notes

  • Exact nominal dimensions. PCB 17.78 × 21.135 × 1.0 mm, all four corners R1.905; datum is the board centre, bottom on z=0; USB-C on the +Y short edge.
  • No mounting holes: the board is held by 14 castellated edge pads, 7 per long edge, 2.54 mm pitch.
  • USB-C receptacle 8.94 mm wide (x −4.47…+4.47), 7.35 mm deep, front flush with the +Y edge, top 4.26 mm above the board bottom.
  • Base board only. The Sense camera expansion board stacks on the same 17.78 × 21.135 outline and is not modelled.
  • Not modelled: ESP32-S3 shield can, U.FL antenna connector, buttons, LEDs and bottom battery/JTAG pads.

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
castellated edge pads2 × 7 pads, 2.54 pitch, on the 17.78 mm-apart long edgescarrier PCB pads or 2.54 mm pin headersdesignedall
USB-C port8.94 wide, top 4.26 above board bottom, flush with the +Y edgeUSB-C cable opening in the case end walldesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Seeed StudioXIAO ESP32S3 getting started (specifications and dimension DXF)webPublisher's page; dimensions are facts
The Pi HutSeeed Studio XIAO ESP32S3webPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
seeed-xiao-esp32s3Seeed Studio XIAO ESP32S3 — board outline, castellated pads and USB-C positionSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=seeed-xiao-esp32s3

Seeed Studio XIAO ESP32S3 — board outline, castellated pads and USB-C position, isometric render of a generated part
Render of seeed-xiao-esp32s3 from the free STEP; not to scale.

Fits with

Questions

How big is the XIAO ESP32S3?

21.135 × 17.78 mm, 1.0 mm PCB, R1.905 corners; 4.26 mm tall at the USB-C port.

Does the XIAO ESP32S3 have mounting holes?

No. It mounts by its 14 castellated pads (7 per side, 2.54 mm pitch) or soldered pin headers.

Is the XIAO ESP32S3 Sense the same size?

The Sense uses this base board with a camera expansion board stacked on the same 21.135 × 17.78 mm outline.