Library › 3D printing › Snap fits & clips ·
3D printable side-release buckles for 20, 25 and 38 mm webbing: plug and socket (STL, STEP)
Can I 3D print a replacement side-release buckle for 1 inch webbing? · Hardware · basis: Webbing widths 20, 25 and 38 mm (3/4, 1, 1-1/2 in) as sold for standard side-release buckles (YKK LB-RU sizes). Xem design.
Also called: 3d printable buckle, side release buckle stl, 1 inch buckle 3d print, 25mm buckle cad, quick release clip strap, backpack buckle replacement
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 48.0 mm
- width
- 46.0 mm
- height
- 10.0 mm
Notes
- Plug: two flexing prongs with catch lips and a centre guide tongue. Socket: matching cavity with two side windows; squeeze both prongs to release.
- Each part has a webbing bar slot at the strap width.
- Print flat, PETG or nylon. Not for life-safety, climbing or harness loads.
3D printable side-release buckles for 20, 25 and 38 mm webbing: plug… size chart
| file | webbing mm | part | overall mm |
|---|---|---|---|
| buckle-20mm-female | 20 | socket | 30 × 30 × 8 |
| buckle-20mm-male | 20 | plug | 30 × 29.99 × 8 |
| buckle-25mm-female | 25 | socket | 35 × 34 × 9 |
| buckle-25mm-male | 25 | plug | 35 × 33.99 × 9 |
| buckle-38mm-female | 38 | socket | 48 × 46 × 10 |
| buckle-38mm-male | 38 | plug | 48 × 45.99 × 10 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| webbing slot | 20 / 25 / 38 mm inside | flat nylon or polypropylene webbing | designed | all |
| prongs | two catch lips | socket side windows | slide | pairs* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| YKK Americas | LB-RU side release buckle (20, 25, 38, 50 mm) | web | Publisher's page; dimensions are facts |
| Pet Hardware | Plastic Side Release Buckle 20 mm (inner width / total length) | web | Publisher's page; dimensions are facts |
| Bayer MaterialScience | Snap-Fit Joints for Plastics: A Design Guide | web | Publisher's page; dimensions are facts |
Free files
★ Free files 6 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| buckle-20mm-female | Side-release buckle socket for 20 mm webbing: webbing bar slot, two side windows for the prongs | STEP · STL |
| buckle-20mm-male | Side-release buckle plug for 20 mm webbing: two flex prongs with catch lips, centre guide tongue | STEP · STL |
| buckle-25mm-female | Side-release buckle socket for 25 mm webbing: webbing bar slot, two side windows for the prongs | STEP · STL |
| buckle-25mm-male | Side-release buckle plug for 25 mm webbing: two flex prongs with catch lips, centre guide tongue | STEP · STL |
| buckle-38mm-female | Side-release buckle socket for 38 mm webbing: webbing bar slot, two side windows for the prongs | STEP · STL |
| buckle-38mm-male | Side-release buckle plug for 38 mm webbing: two flex prongs with catch lips, centre guide tongue | STEP · STL |
https://xemstudio.com/mcp (free, no account). Your AI can then look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=side-release-buckles

Fits with



Questions
What size buckle do I need?
Match the webbing width: 20 mm (3/4 in), 25 mm (1 in) or 38 mm (1.5 in). The size is the inside width of the strap slot.
What filament for a printed buckle?
PETG or nylon. PLA prongs get brittle and creep under steady load.
Is a printed buckle safe for load?
No: use it for bags, gear straps and pet toys, not climbing, harness or life-safety loads.
How should I print it?
Flat on the bed so the prongs bend within the layers.