Library › Hardware › Furniture & cabinet hardware ·
Southco 93 push-to-close latch: Ø25.5 mm hole, 1"-20 nut, keeper, door thickness; E4 touch latch panel ranges
What hole does a Southco 93 push-to-close latch need? · Standard part · basis: Southco 93 series datasheet (mm, with inches) and the E4 touch latch listing. The cam and body outlines are not described in words, so no file
Also called: southco 93 latch, 93-304, 93-308, push to close latch dimensions, push latch cutout, 25.5 mm hole latch, e4-10-104-10, southco e4, push push latch, touch latch
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 10 in table
Notes
- Series 93 is a round, threaded-barrel push-to-close latch: a Ø25.5 mm hole, the body goes through the door and a 1"-20 nut (32 mm across flats) clamps it. The door is pushed shut on a keeper on the frame and the cam latches; a pull tab or key opens it. Mounting hole Ø25.5 mm (+0.3 / −0). Keeper: two M3 or No. 6 screws (not supplied); with the adjustable keeper not used the frame location is 16 ±1.5 mm, or 24 ±1.5 mm for the alternate position. Replacement keeper 93-14-101-24. Maximum nut torque 7.9 N·m (70 in·lbf); maximum working load 530 N (120 lbf).
- Maximum door thickness is 10.3 mm for the pull-tab styles (93-303, 93-304, 93-313, 93-314) and 12.7 mm for latch only (93-307, 93-308). Accessories: pull tab in line 93-21-301-14, perpendicular 93-21-322-14, ejector spring 93-22-302-18, keys PK-10-01 and PK-10-01-05.
- Left out: the labelled body dimensions A, B, C and G (the text export does not tie them to features), the keeper hole spacing (printed as 9.5 ±0.2 mm without saying between which holes) and the cam diameters, so the part is not drawn.
- The E4 family (plastic snap-in push-to-close latches) is listed by panel thickness only: E4-10-103-10 1.8–2.0 or 2.9–3.2 mm; E4-10-104-10 4.6–4.9 or 6.2–6.5 mm; E4-10-101-10 8.1–8.6 mm; E4-10-201-10 1–3 mm and E4-10-202-10 3–5 mm (the two large ones).
- No file: the makers' text pages print the body, flange, plunger and strike-plate drawing numbers without naming the feature each one measures, and the outline is not stated in words, so nothing is drawn. A plain cylinder for the bore would not be the part.
Southco 93 push-to-close latch: Ø25.5 mm hole, 1"-20 nut, keeper… size chart
| quantity | value |
|---|---|
| mounting hole | Ø25.5 mm (+0.3 / −0) |
| mounting nut | 1"-20 thread, 32 mm (1.25 in) across flats |
| maximum nut torque | 7.9 N·m (70 in·lbf) |
| keeper frame location (adjustable keeper not used) | 16 ±1.5 mm, alternate 24 ±1.5 mm |
| keeper screws | two M3 or No. 6 (not supplied); replacement keeper 93-14-101-24 |
| maximum door thickness, pull tab styles | 10.3 mm (.407 in): 93-303, 93-304 (in line); 93-313, 93-314 (perpendicular) |
| maximum door thickness, latch only | 12.7 mm (.500 in): 93-307, 93-308 |
| maximum working load | 530 N (120 lbf) |
| flammability | UL94-HB |
| E4 panel thickness | E4-10-103-10 1.8–2.0 / 2.9–3.2 mm; E4-10-104-10 4.6–4.9 / 6.2–6.5 mm; E4-10-101-10 8.1–8.6 mm; E4-10-201-10 1–3 mm; E4-10-202-10 3–5 mm |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| mounting hole | Ø25.5 (+0.3 / −0) | body through the door; 1"-20 nut, 32 across flats, max torque 7.9 N·m; door max 10.3 (pull tab) or 12.7 (latch only) | designed | all |
| keeper | frame location 16 ±1.5 (alternate 24 ±1.5); 2 × M3 or No. 6 screws | keeper 93-14-101-24 | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Southco (93 series datasheet, via West Marine) | 93 push-to-close latch: mounting hole, nut, keeper, door thickness, load | web | Publisher's page; dimensions are facts |
| Monroe Engineering (Southco E4 listing) | E4 touch latches: part numbers and panel thickness ranges | web | Publisher's page; dimensions are facts |
Xem scan
File coming
No downloadable true-size file yet: the published figures do not fix the whole shape, and Xem never guesses a number. A measured scan is planned; request it and it moves up.
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=southco-93-push-to-close-latch
Fits with


Questions
What hole does a Southco 93 push-to-close latch need?
Ø25.5 mm (+0.3 / −0), with a 1"-20 nut, 32 mm across flats, on the back.
How thick can the door be for a Southco 93?
Up to 10.3 mm for the pull-tab styles and 12.7 mm for the latch-only styles.