Library › Hardware › Bearings, rails & motion ·

Spur gears, module 1.25: 10 to 80 teeth (20° involute)

What is the pitch diameter of a module 1.25 spur gear? · Hardware · basis: ISO 53 basic rack: 20° pressure angle, addendum m, dedendum 1.25 m; pitch Ø = m × teeth, tip Ø = m × (teeth + 2), root Ø = m × (teeth − 2.5)

Also called: module 1.25 spur gear stl, m1.25 gear dimensions, spur gear calculator pitch diameter, involute gear step file, 3d printable gear

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
26 in table

Notes

  • Centre distance of two module 1.25 gears = m × (N1 + N2) / 2. Face width 10 mm, plain bore (add a hub, key or set screw to suit). Teeth below 17 are drawn without profile shift, so they undercut as real unshifted gears do.

Spur gears, module 1.25: 10 to 80 teeth size chart

teethpitch dia (mm)tip dia (mm)root dia (mm)face (mm)bore (mm)
1012.515.09.3810.03
1215.017.511.8810.04
1417.520.014.3810.05
1518.7521.2515.6210.05
1620.022.516.8810.06
1822.525.019.3810.07
2025.027.521.8810.08
2227.530.024.3810.09
2430.032.526.8810.09
2531.2533.7528.1210.010
2835.037.531.8810.011
3037.540.034.3810.012
3240.042.536.8810.013
3543.7546.2540.6210.014
3645.047.541.8810.015
4050.052.546.8810.016
4252.555.049.3810.017
4556.2558.7553.1210.019
4860.062.556.8810.020
5062.565.059.3810.021
5670.072.566.8810.023
6075.077.571.8810.025
6480.082.576.8810.025
7087.590.084.3810.025
7290.092.586.8810.025
80100.0102.596.8810.025

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
tooth form20° pressure angle, addendum 1.25, dedendum 1.5625; pitch Ø = 1.25 × teeth (ISO 53 basic rack)mating gear of the same module 1.25; centre distance = 1.25 × (N1 + N2) / 2designedall
boreØ3 (10 teeth) to Ø25 (80 teeth), plain, per the tableshaft of the same Ø; add a hub, key or set screw to suitslideall
face width10shoulder or spacer on each face; keep the pair axially aligneddesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ISOISO 53 standard basic rack (20° pressure angle, addendum 1 m, dedendum 1.25 m) and ISO 54 modulesstandardISO; dimensions are facts verify

Free files

★ Free files 26 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
gear-m1-25-10tmodule 1.25, 10 teeth: pitch Ø12.5, tip Ø15, root Ø9.375, face 10, bore Ø3STEP · STL
gear-m1-25-12tmodule 1.25, 12 teeth: pitch Ø15, tip Ø17.5, root Ø11.875, face 10, bore Ø4STEP · STL
gear-m1-25-14tmodule 1.25, 14 teeth: pitch Ø17.5, tip Ø20, root Ø14.375, face 10, bore Ø5STEP · STL
gear-m1-25-15tmodule 1.25, 15 teeth: pitch Ø18.75, tip Ø21.25, root Ø15.625, face 10, bore Ø5STEP · STL
gear-m1-25-16tmodule 1.25, 16 teeth: pitch Ø20, tip Ø22.5, root Ø16.875, face 10, bore Ø6STEP · STL
gear-m1-25-18tmodule 1.25, 18 teeth: pitch Ø22.5, tip Ø25, root Ø19.375, face 10, bore Ø7STEP · STL
gear-m1-25-20tmodule 1.25, 20 teeth: pitch Ø25, tip Ø27.5, root Ø21.875, face 10, bore Ø8STEP · STL
gear-m1-25-22tmodule 1.25, 22 teeth: pitch Ø27.5, tip Ø30, root Ø24.375, face 10, bore Ø9STEP · STL
gear-m1-25-24tmodule 1.25, 24 teeth: pitch Ø30, tip Ø32.5, root Ø26.875, face 10, bore Ø9STEP · STL
gear-m1-25-25tmodule 1.25, 25 teeth: pitch Ø31.25, tip Ø33.75, root Ø28.125, face 10, bore Ø10STEP · STL
gear-m1-25-28tmodule 1.25, 28 teeth: pitch Ø35, tip Ø37.5, root Ø31.875, face 10, bore Ø11STEP · STL
gear-m1-25-30tmodule 1.25, 30 teeth: pitch Ø37.5, tip Ø40, root Ø34.375, face 10, bore Ø12STEP · STL
gear-m1-25-32tmodule 1.25, 32 teeth: pitch Ø40, tip Ø42.5, root Ø36.875, face 10, bore Ø13STEP · STL
gear-m1-25-35tmodule 1.25, 35 teeth: pitch Ø43.75, tip Ø46.25, root Ø40.625, face 10, bore Ø14STEP · STL
gear-m1-25-36tmodule 1.25, 36 teeth: pitch Ø45, tip Ø47.5, root Ø41.875, face 10, bore Ø15STEP · STL
gear-m1-25-40tmodule 1.25, 40 teeth: pitch Ø50, tip Ø52.5, root Ø46.875, face 10, bore Ø16STEP · STL
gear-m1-25-42tmodule 1.25, 42 teeth: pitch Ø52.5, tip Ø55, root Ø49.375, face 10, bore Ø17STEP · STL
gear-m1-25-45tmodule 1.25, 45 teeth: pitch Ø56.25, tip Ø58.75, root Ø53.125, face 10, bore Ø19STEP · STL
gear-m1-25-48tmodule 1.25, 48 teeth: pitch Ø60, tip Ø62.5, root Ø56.875, face 10, bore Ø20STEP · STL
gear-m1-25-50tmodule 1.25, 50 teeth: pitch Ø62.5, tip Ø65, root Ø59.375, face 10, bore Ø21STEP · STL
gear-m1-25-56tmodule 1.25, 56 teeth: pitch Ø70, tip Ø72.5, root Ø66.875, face 10, bore Ø23STEP · STL
gear-m1-25-60tmodule 1.25, 60 teeth: pitch Ø75, tip Ø77.5, root Ø71.875, face 10, bore Ø25STEP · STL
gear-m1-25-64tmodule 1.25, 64 teeth: pitch Ø80, tip Ø82.5, root Ø76.875, face 10, bore Ø25STEP · STL
gear-m1-25-70tmodule 1.25, 70 teeth: pitch Ø87.5, tip Ø90, root Ø84.375, face 10, bore Ø25STEP · STL
gear-m1-25-72tmodule 1.25, 72 teeth: pitch Ø90, tip Ø92.5, root Ø86.875, face 10, bore Ø25STEP · STL
gear-m1-25-80tmodule 1.25, 80 teeth: pitch Ø100, tip Ø102.5, root Ø96.875, face 10, bore Ø25STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=spur-gears-module-1-25

Spur gears, module 1.25: 10 to 80 teeth (20° involute), isometric render of a generated part
Render of gear-m1-25-35t from the free STEP; not to scale.

Fits with

Questions

Pitch diameter of a module 1.25, 20-tooth gear?

25 mm; tip 27.5 mm.

Centre distance?

m × (N1 + N2) / 2: a 20 and a 40 tooth module 1.25 pair sit 37.5 mm apart.