Library › Mechanisms › Cams ·

Two-lobe stamp cam R14 → R30, 8 thick, Ø8 bore

What lifts a stamp? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: stamp cam, wiper cam, leva de pisón, Pochdaumen

Exact dimensions. True size, with no tolerance added.

length
45.96 mm
width
55.17 mm
height
8.0 mm

Notes

  • Two lobes, each rising from R14 to R30 over 140° (cycloidal) and dropping straight back: the stamp's tappet rides up the lobe and falls off its tip twice per turn.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Two-lobe stamp cam R14 → R30, 8 thick, Ø8 bore size chart

dimensionvalue
lobes2
lift16 mm
boreØ8

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 85: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
stamp-cam-2-lobe-r14-r30-bore8as drawn in the mechanism's own frameSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=stamp-cam-2-lobe-r14-r30-bore8

Two-lobe stamp cam R14 → R30, 8 thick, Ø8 bore, isometric render of a generated part
Render of stamp-cam-2-lobe-r14-r30-bore8 from the free STEP; not to scale.

Fits with

Questions

What lifts a stamp?

Two lobes, each rising from R14 to R30 over 140° (cycloidal) and dropping straight back: the stamp's tappet rides up the lobe and falls off its tip twice per turn.