Library › Mechanisms › Linkages ·

Tongs shackle link 50 mm centres, 12 × 5

What is the tongs shackle? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: shackle link, grillete, Schäkellasche

Exact dimensions. True size, with no tolerance added.

length
62.0 mm
width
12.0 mm
height
5.0 mm

Notes

  • 12 × 5 link with Ø3 holes 50 mm apart: the two tong links pin to its lower hole, the hoist hook goes in the upper.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Tongs shackle link 50 mm centres, 12 × 5 size chart

dimensionvalue
centres50 mm
section12 × 5 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 494: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
tongs-shackle-link-50shackle, z 0..5, holes at x = ±25STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tongs-shackle-link-50

Tongs shackle link 50 mm centres, 12 × 5, isometric render of a generated part
Render of tongs-shackle-link-50 from the free STEP; not to scale.

Fits with

Questions

What is the tongs shackle?

12 × 5 link with Ø3 holes 50 mm apart: the two tong links pin to its lower hole, the hoist hook goes in the upper.