Library › Tri-clamp & pipe › Caps & heads ·

3 in tri-clamp end caps: blind bearing cap, shaft-seal cap and 3-port cap

What 3 inch tri-clamp caps hold a bearing or a shaft seal? · Hardware · basis: Fabrication spec: 3 in cap profile with a Ø76.2 neck (the 20° back cone runs to the tube OD, then straight), bored and ported; exact geometry

Also called: tri clamp bearing cap, tri clamp shaft seal, 3 inch tri clamp port cap

Long Earth Society build part. Parts of the HTD engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
3 in table

Notes

  • Blind cap (−X branch): a 6001 at the end of a Ø36 boss that reaches 20 into the branch. Seal cap (+X): a 6001 at the boss end and another near the outer face, the shaft seal's housing (12 × 22 × 7) at the outer face, three M4 holes for the generator bracket.
  • Port cap (top of the cross): three 1/4 NPT ports for the fill valve, the gauge and the relief valve. The crankcase is the bounce space: it reaches the working space's mean pressure through the piston's fit and the rod bore.
  • The shaft seal is the one leak path to the outside of a charged engine: it has to be a seal rated for the relief pressure in that housing size, and a charged engine will still lose helium slowly through it.

3 in tri-clamp end caps: blind bearing cap, shaft-seal cap and… size chart

partthickness (mm)seats
bearing-cap-3in-blind-600128.06001
seal-cap-3in-6001-seal1230.02 × 6001 + seal 12 × 22 × 7
port-cap-3in-3x-npt1416.03 × 1/4 NPT

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
facesISO 2852 3 in (neck Ø76.2)gasket-3in + 3 in clampclampall
bearing seatsØ28 × 8bearing-6001 outer ringpressbearing-cap-*
bearing seatsØ28 × 8 (two)bearing-6001 outer ringspressseal-cap-*
seal housingØ22 × 7radial shaft seal 12 × 22 × 7pressseal-cap-*
shaft clearanceØ14Ø12 shaft (no contact)designedall
bracket holes3 × M4 (drawn Ø4 × 10) on r 30shcs-m4x12designedseal-cap-*
ports3 × 1/4-18 NPT, tap drill Ø11.1 × 11fill valve, gauge, relief valve (1/4 NPT male)designedport-cap-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ASMEASME B1.20.1 Pipe Threads (NPT): 1/8-27 and 1/4-18, tap drills Ø8.6 / Ø11.1 as on this site's thread envelopesstandardASME; dimensions are facts verify
Tameson (product listing)Rotary shaft seal 12 × 22 × 7 mm (DIN 3760 sizes)webvendor page; dimensions are facts verify
Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 3 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
bearing-cap-3in-blind-60013 in blind bearing cap: ISO 2852 face, Ø76.2 neck to 28, inner boss Ø36 × 20 with a 6001 seatSTEP · STL
seal-cap-3in-6001-seal123 in seal cap: face, neck to 30, inner boss with a 6001 seat, a second 6001 seat 14..22, 12 × 22 × 7 shaft-seal housing at the outer face, 3 × M4 tapped on r 30STEP · STL
port-cap-3in-3x-npt143 in port cap: neck to 16, three 1/4 NPT ports on r 20 (fill valve, gauge, relief valve)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-bearing-seal-caps-3in

3 in tri-clamp end caps: blind bearing cap, shaft-seal cap and 3-port cap, isometric render of a generated part
Render of seal-cap-3in-6001-seal12 from the free STEP; not to scale.

Fits with

Questions

Where do the fill valve, gauge and relief valve go?

In the 3 in port cap on top of the crankcase cross; the working space follows through the piston's fit.