Library › Hardware › Heat transfer ·

Burner shroud for a 10 in hot cup (optional)

How do I keep a burner's flame on the bottom of a big tri-clamp pot? · Hardware · basis: Exact geometry

Also called: burner shroud stirling

Long Earth Society build part. Parts of the HTD engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
1 in table

Notes

  • A separate heat exchanger, optional: a sleeve round the cup's lower end that holds the flame against the floor and the lower wall. Three tabs bolt to the stand's legs (M5 × 20 and nuts). The engine runs without it.

Burner shroud for a 10 in hot cup size chart

id (mm)od (mm)z (mm)
272.0276.0100–190

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
boreØ272hot cup Ø254 (9 radial, flue)designedall
tab holesØ5.5shcs-m5x20designedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
burner-shroud-10inburner shroud (heat exchanger, optional): tube Ø272/Ø276 z 100..190 round the cup floor, three tabs to the legsSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-cup-burner-shroud-10in

Burner shroud for a 10 in hot cup (optional), isometric render of a generated part
Render of burner-shroud-10in from the free STEP; not to scale.

Fits with

Questions

Is the shroud needed?

No: it keeps more of the flame on the floor.