Library › Mechanisms › Cams ·

Follower bar 8 × 8 × 60 with a Ø3 cross hole for a roller pin

What rests on the waved wheel? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: follower bar, cam follower rod, barra seguidora, Stößelstange

Exact dimensions. True size, with no tolerance added.

length
8.0 mm
width
8.0 mm
height
60.0 mm

Notes

  • 8 × 8 bar standing on the wheel's face, with a Ø3 hole 4 mm above its foot for the pin of a Ø10 roller (a 623 bearing) whose axis is radial to the wheel.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Follower bar 8 × 8 × 60 with a Ø3 cross hole for a roller pin size chart

dimensionvalue
bar8 × 8 × 60
roller pin holeØ3, 4 mm above the foot

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 165: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
waved-wheel-follower-bar-8x8-roller-pinbar beside the roller, roller pin along X at z = 23STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=waved-wheel-follower-bar-8x8-roller-pin

Follower bar 8 × 8 × 60 with a Ø3 cross hole for a roller pin, isometric render of a generated part
Render of waved-wheel-follower-bar-8x8-roller-pin from the free STEP; not to scale.

Fits with

Questions

What rests on the waved wheel?

8 × 8 bar standing on the wheel's face, with a Ø3 hole 4 mm above its foot for the pin of a Ø10 roller (a 623 bearing) whose axis is radial to the wheel.