Library › Airfoils › Other airfoils ·

AG35 airfoil (Drela AG series)

What are the AG35-AG38 airfoils? · Standard part · basis: Coordinates from the UIUC Airfoil Coordinates Database; thickness, camber and section by Xem Studio

Also called: ag35, ag35 airfoil, drela ag35, ag series airfoil, ag35 ag36 ag37 ag38, bubble dancer airfoil, rudder elevator spoiler glider airfoil, drela airfoil, ag35 coordinates, res glider airfoil, AG35 airfoil, AG35 coordinates, AG35 dat, AG35 STEP, AG35 STL, AG35 profile

Exact dimensions. True size, with no tolerance added.

length
100.0 mm
width
20.0 mm
height
8.72 mm

Notes

  • AG35-AG38 are Mark Drela's thin airfoils used across the wing of the Bubble Dancer 3 m RES sailplane, with ht21 for the tail surfaces (CRRC).
  • The design combined the Allegro layout with 'some new thin airfoils' for easy building as a thermal glider that can still handle wind and winch launches; the model weighs about 31 oz with a sink rate of about 0.8 ft/s (CRRC).
  • AG35: Mark Drela (AG series). Maximum thickness 8.72 % of chord at 27.9 % chord; maximum camber 4.37 % of chord at 26.6 % chord.
  • Coordinates from the UIUC Airfoil Coordinates Database (M. Selig, UIUC Applied Aerodynamics Group), file ag35.dat, titled 'AG35'. Thickness and camber are computed by Xem Studio from those points (vertical distance at equal x, linear between points).
  • The published trailing edge is open (0.249 % chord thick). As on the NACA pages, the file uses a single sharp trailing-edge point: each surface is shifted linearly from zero at the leading edge to meet at the mid point of the published trailing edge, a change of at most 0.124 % chord, at the trailing edge itself.
  • The file is a 100 mm chord section, 20 mm deep: scale it uniformly to your chord, or import the STEP and sweep or loft it into a wing. Thickness scales with chord; the shape is the same at any size.
  • Used on: Bubble Dancer (RC sailplane), Allegro-Lite (prototype wing).

AG35 airfoil size chart

parametervaluesource
Max thickness8.72 % chord at 27.9 % chordcomputed from the UIUC coordinates
Max camber4.37 % chord at 26.6 % chordcomputed from the UIUC coordinates
Published points180 (92 upper, 89 lower, shared leading edge)UIUC coordinates
Trailing edge as publishedopen, 0.249 % chord thickUIUC coordinates
y at x = 1.25 % chordupper +4.404 / lower +1.715 % chordlinear between the published points (UIUC coordinates)
y at x = 2.5 % chordupper +5.151 / lower +1.359 % chordlinear between the published points (UIUC coordinates)
y at x = 5 % chordupper +6.180 / lower +0.925 % chordlinear between the published points (UIUC coordinates)
y at x = 7.5 % chordupper +6.896 / lower +0.648 % chordlinear between the published points (UIUC coordinates)
y at x = 10 % chordupper +7.431 / lower +0.453 % chordlinear between the published points (UIUC coordinates)
y at x = 15 % chordupper +8.139 / lower +0.205 % chordlinear between the published points (UIUC coordinates)
y at x = 20 % chordupper +8.530 / lower +0.077 % chordlinear between the published points (UIUC coordinates)
y at x = 25 % chordupper +8.706 / lower +0.018 % chordlinear between the published points (UIUC coordinates)
y at x = 30 % chordupper +8.707 / lower +0.000 % chordlinear between the published points (UIUC coordinates)
y at x = 40 % chordupper +8.260 / lower -0.000 % chordlinear between the published points (UIUC coordinates)
y at x = 50 % chordupper +7.328 / lower -0.000 % chordlinear between the published points (UIUC coordinates)
y at x = 60 % chordupper +6.282 / lower -0.000 % chordlinear between the published points (UIUC coordinates)
y at x = 70 % chordupper +4.997 / lower -0.000 % chordlinear between the published points (UIUC coordinates)
y at x = 80 % chordupper +3.489 / lower -0.000 % chordlinear between the published points (UIUC coordinates)
y at x = 90 % chordupper +1.884 / lower -0.000 % chordlinear between the published points (UIUC coordinates)
y at x = 95 % chordupper +1.067 / lower -0.000 % chordlinear between the published points (UIUC coordinates)
Bubble Dancer wing airfoilsag35, ag36, ag37, ag38CRRC
Tail airfoilht21CRRC
Span / area120 in / 1000 in^2CRRC
Weight / sink~31 oz (880 g) / ~0.8 ft/sCRRC
Coordinates sourceUIUC Airfoil Coordinates Database: ag35.dat ('AG35')UIUC Applied Aerodynamics Group (M. Selig)

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

UIUC Applied Aerodynamics Group (M. Selig)UIUC Airfoil Coordinates Database: ag35.dat ('AG35')webUIUC Airfoil Coordinates Database, public research data; coordinates are facts, cited and linked, not rehosted
UIUC Applied Aerodynamics Group (M. Selig)UIUC Airfoil Coordinates Database (original: Mark Drela (AG series))webUIUC Airfoil Coordinates Database, public research data; coordinates are facts, cited and linked, not rehosted
Charles River Radio Controllers (M. Drela designs)Bubble Dancer 3m RES sailplanewebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
ag35-airfoil-section-100mm-chordAG35 section, 100 mm chord × 20 mm span, 179 points from the published coordinates, single trailing-edge point (scale to your chord)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=ag35-airfoil

AG35 airfoil (Drela AG series), isometric render of a generated part
Render of ag35-airfoil-section-100mm-chord from the free STEP; not to scale.

Fits with

Questions

Where do AG35-AG38 go on the wing?

They are listed together for the Bubble Dancer wing; the page does not give spanwise stations (CRRC).

How thick is the AG35?

Maximum thickness 8.72 % of chord at 27.9 % chord: 8.72 mm on a 100 mm chord (computed from the UIUC coordinates).

How much camber does the AG35 have?

Maximum camber 4.37 % of chord at 26.6 % chord (computed from the UIUC coordinates).

How do I use it for my wing?

Scale the 100 mm section to your chord (e.g. 180 mm chord = 180 % scale), then extrude or loft between root and tip sections. For a tapered wing, scale a root and a tip copy and loft between them.