Library › Phones, tablets & wearables › Smartwatches & wearables · 2024 ·

AirPods Pro 3 case

What are the AirPods Pro 3 case dimensions? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed by Xem Studio

Also called: airpods pro 3 case size, airpods pro 3 case measurements

Exact dimensions. True size, with no tolerance added.

length
47.22 mm
width
62.22 mm
height
21.84 mm

Notes

  • From Apple's dimensional drawing for MagSafe Charging Case for AirPods Pro 3 (footer; title block TITLE blank): the numbers below are as printed (Apple's drawing is linked, not copied). No body file: the drawing does not dimension the outline fully enough to build a true shape without guessing.
  • Apple's notes for accessory makers: Note 1: ACCESSORIES INTRUDING INTO SHADED REGION(S) WILL NEGATIVELY AFFECT PRODUCT PERFORMANCE.; 2 TO ENSURE FULL FUNCTIONALITY, DO NOT OBSTRUCT THIS AREA WITH METAL OR OTHER CONDUCTIVE MATERIAL.; 3 TO ENSURE FULL FUNCTIONALITY WITH MINIMAL IMPACT TO QI CHARGING PERFORMANCE, MINIMIZE ANY MATERIAL THICKNESS.; 4 TO ENABLE CHARGING VIA APPLE WATCH CHARGER, IT IS RECOMMENDED THERE BE NO MATERIAL BETWEEN BACK OF DEVICE AND WATCH CHARGER.; 5 PROTECTIVE CASES OR COVERS MAY DETUNE OR IMPACT RF & WIRELESS CHARGING PERFORMANCE. IMPACT IS HIGHLY DEPENDENT ON MATERIAL AND MATERIAL THICKNESS. HIGHLY RECOMM
  • AirPods Pro 3 case: 45.2 × 60.6 × 21.7 mm (height × width × depth), 1.78 × 2.39 × 0.85 in, 50.8 g, 0 in display.
  • AirPods 4 case: 46.2 × 50.1 × 21.2 mm, 32.3 g with buds (the smallest). AirPods (3rd gen) case: 46.4 × 54.4 × 21.4 mm, 37.9 g.
  • Case holders: hinge is on the top; the lid needs 25 mm of swing clearance; MagSafe-compatible cases centre a Ø18 mm magnet ring on the back.
  • Compare with the rest of the family on the AirPods Pro 2 / Pro 3, AirPods 4 and AirPods 3 charging cases sheet.

AirPods Pro 3 case size chart

parametervalue
width × length × thickness62.22 × 47.22 × 21.84 mm
overall (as printed)62.22 PRODUCT LENGTH
overall (as printed)47.22 PRODUCT HEIGHT
overall (as printed)21.84 PRODUCT THICKNESS
overall (as printed)[1] 62.22 (open view)
overall (as printed)[1] 62.07 (open, lid seam width)
overall (as printed)[1] 19.64 (open case base height)
LED (front)[1] LED OUTER DIAMETER = Ø0.80, Ø2.80 RECOMMENDED MINIMUM KEEPOUT, DO NOT OBSTRUCT LED; 26.31 bottom edge to LED centre; 31.11 left edge to LED centre
lid115.00° NOMINAL; 47.10 LID CLEARANCE SCOOP (section A-A); [1] hinge keep-out
lanyard loop (side)[1] 4.16 top edge to keep-out, [1] 9.08 keep-out height, [1] 4.47 keep-out width; DETAIL B 2X Ø3.47, 4.67 pitch; SECTION C-C LANYARD LOOP INTERNAL DIMENSIONS 2.80 x 2.00
hinge keep-out (back)[1] 49.70 RECOMMENDED MINIMUM KEEPOUT VARIES DEPENDING ON ACCESSORY'S MATERIAL THICKNESS; [1] 1.00; [1] 7.90 RECOMMENDED MINIMUM KEEPOUT VARIES...
Apple Watch charger keep-out (back)[4] Ø28.62 RECOMMENDED MINIMUM KEEPOUT, MATERIAL IN SPECIFIED AREA MAY DISABLE WATCH CHARGING FEATURE; centre 16.76 above bottom, 31.11 from right edge
bottom (port side)[1] 12.46 RECOMMENDED MINIMUM KEEPOUT x [1] 6.60; [1] Ø3.45 RECOMMENDED PORT HOLE KEEPOUT; [1] 7.66 x [1] 3.35 RECOMMENDED SPEAKER HOLE CUTOUT; [3] 1.00 RECOMMENDED DISTANCE TO QI WIRELESS CHARGER, SH
wireless charging keep-out (back)[2] 52.22 wide x 37.22 high, 5.00 from top edge, 5.00 from right edge
RF antenna keep-outs[5] 21.23 high x [5] 15.20 wide at lower corners
buttonnone shown on back view

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Apple (official)AirPods Pro 2 tech specswebManufacturer spec page
Apple (official)AirPods 4 tech specswebManufacturer spec page
Apple (official)Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)PDFApple developer terms; drawings for accessory design
AppleMagSafe Charging Case for AirPods Pro 3 (footer; title block TITLE blank) dimensional drawing (Accessory Design Guidelines)PDFApple's terms; linked, not hosted

Xem scan

File coming

No downloadable true-size file yet: the published figures do not fix the whole shape, and Xem never guesses a number. A measured scan is planned; request it and it moves up.

Votes decide what gets scanned first.

+1 for a scan of AirPods Pro 3 case

Your vote moves it up the list. Email is optional: only if you want one message when the file is ready.

Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=airpods-pro-3-case

width
Schematic, not to scale.

Fits with

Questions

How big is the AirPods Pro 3 case in inches?

1.78 × 2.39 × 0.85 in (height × width × depth); 45.2 × 60.6 × 21.7 mm.

What are the AirPods Pro 3 case dimensions in mm?

45.2 × 60.6 × 21.7 mm, 50.8 g.