Library › Car design › Suspension geometry ·
Anti-squat
What is anti-squat and how much should an RC buggy run? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio
Also called: anti squat, rc anti squat, anti squat degrees, rear hinge pin angle, anti squat percentage, squat under acceleration, instant centre anti squat, 4 link anti squat, rear pivot block
Exact dimensions. True size, with no tolerance added.
- sizes
- 3 in table
Notes
- Anti-squat controls how much the rear compresses under acceleration. On RC cars it is the angle of the rear inner hinge pins, front higher than rear (CompetitionX); on full-size cars it is set by the side-view instant centre relative to the CG height (Formula1-Dictionary).
- More anti-squat gives more forward drive on high grip and less on-power steering; less lets the rear squat for grip on loose or bumpy tracks (CompetitionX; Tekno).
- Most 1/10 off-road cars start around 2-3 deg (CompetitionX).
- Used on: 1/10 off-road buggies.
- The file is a reference example built by Xem Studio from the numbers above (Reference 1/10 off-road: track 250 mm and 90 mm wheel+tyre (EFRA maxima); wheelbase illustrative.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.
Anti-squat size chart
| parameter | value or range | source |
|---|---|---|
| 1/10 off-road starting point | 2-3 deg | CompetitionX |
| Insert labels | 0 (flat), 2, 3, 4 deg | CompetitionX |
| Percentage method (anti-dive example) | 50% = force line crosses halfway to CG height | Formula1-Dictionary |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| CompetitionX | RC Anti-Squat Explained | web | Publisher's page; dimensions are facts |
| Tekno RC | Tekno RC Setup Guide | web | Publisher's page; dimensions are facts |
| Formula1-Dictionary | Anti-Dive and Anti-Squat Suspension Geometry | web | Publisher's page; dimensions are facts |
Free files
★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| anti-squat-geometry | Anti-squat demo: rear arm line rising 2.5° to the instant centre (illustrative layout) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=anti-squat

Fits with
Questions
High grip or low grip?
High grip: more anti-squat; low grip: less (CompetitionX).





