Library › Hardware › Fasteners ·

Button head socket cap screws, inch: #4-40 to 1/2-13 (ASME B18.3)

What are the dimensions of a 5/16-18 button head socket cap screw? · Standard part · basis: ASME B18.3 inch socket screws: head diameter A (max), head height H, hex socket J; thread drawn as a plain cylinder at the major diameter

Also called: 5/16-18 bhcs, button head cap screw dimensions inch, 1/4-20 button head, t-slot button head screw, bhcs step file

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
9 in table

Notes

  • The low-profile screw T-slot framing uses on brackets and panels: 1/4-20 for 10-series, 5/16-18 for 15-series. Length is under the head; the head is a dome to height H over diameter A.

Button head socket cap screws, inch: #4-40 to 1/2-13 size chart

sizemajor (mm)tpihead dia (mm)head h (mm)hex key (in)lengths (in)
#4-402.845405.411.51/160.25, 0.375, 0.5
#6-323.505326.651.835/640.25, 0.375, 0.5
#8-324.166327.922.113/320.375, 0.5
#10-244.826249.172.541/80.375, 0.5, 0.75
#10-324.826329.172.541/80.375, 0.5
1/4-206.352011.13.355/320.375, 0.5, 0.625, 0.75, 1
5/16-187.9381813.894.223/160.5, 0.625, 0.75, 1
3/8-169.5251616.665.057/320.75, 1
1/2-1312.71322.226.735/161

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
shank (thread as plain cylinder)#4-40 Ø2.845, #6-32 Ø3.505, #8-32 Ø4.166, #10 Ø4.826, 1/4-20 Ø6.35, 5/16-18 Ø7.938, 3/8-16 Ø9.525, 1/2-13 Ø12.7clearance hole close / free fit: #4 Ø0.116 / 0.1285 in; #6 0.144 / 0.1495; #8 0.1695 / 0.177; #10 0.196 / 0.201; 1/4 0.257 / 0.266; 5/16 0.323 / 0.332; 3/8 0.386 / 0.397; 1/2 0.5156 / 0.5312designedbhcs-*
shank (tapped hole)sametap drill (75 % thread): #4-40 #43 Ø0.089; #6-32 #36 0.1065; #8-32 #29 0.136; #10-24 #25 0.1495; #10-32 #21 0.159; 1/4-20 #7 0.201; 5/16-18 F 0.257; 3/8-16 5/16 0.3125; 1/2-13 27/64 0.4219 indesignedbhcs-*
dome headØ5.41 × 1.5 (#4) … Ø22.22 × 6.73 (1/2); hex key 1/16 … 5/16 in (see table)recess at least head Ø × height; key access to the socketslidebhcs-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ASMEB18.3 Socket cap, shoulder, set screws, hex and spline keys (inch series): head diameter, height, hex socketstandardASME; dimensions are facts verify

Free files

★ Free files 25 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
bhcs-4-40x6.35mm#4-40 × 0.25 in button head socket cap screw: head Ø5.41 × 1.50, 1/16 in hex keySTEP · STL
bhcs-4-40x9.52mm#4-40 × 0.375 in button head socket cap screw: head Ø5.41 × 1.50, 1/16 in hex keySTEP · STL
bhcs-4-40x12.70mm#4-40 × 0.5 in button head socket cap screw: head Ø5.41 × 1.50, 1/16 in hex keySTEP · STL
bhcs-6-32x6.35mm#6-32 × 0.25 in button head socket cap screw: head Ø6.65 × 1.83, 5/64 in hex keySTEP · STL
bhcs-6-32x9.52mm#6-32 × 0.375 in button head socket cap screw: head Ø6.65 × 1.83, 5/64 in hex keySTEP · STL
bhcs-6-32x12.70mm#6-32 × 0.5 in button head socket cap screw: head Ø6.65 × 1.83, 5/64 in hex keySTEP · STL
bhcs-8-32x9.52mm#8-32 × 0.375 in button head socket cap screw: head Ø7.92 × 2.11, 3/32 in hex keySTEP · STL
bhcs-8-32x12.70mm#8-32 × 0.5 in button head socket cap screw: head Ø7.92 × 2.11, 3/32 in hex keySTEP · STL
bhcs-10-24x9.52mm#10-24 × 0.375 in button head socket cap screw: head Ø9.17 × 2.54, 1/8 in hex keySTEP · STL
bhcs-10-24x12.70mm#10-24 × 0.5 in button head socket cap screw: head Ø9.17 × 2.54, 1/8 in hex keySTEP · STL
bhcs-10-24x19.05mm#10-24 × 0.75 in button head socket cap screw: head Ø9.17 × 2.54, 1/8 in hex keySTEP · STL
bhcs-10-32x9.52mm#10-32 × 0.375 in button head socket cap screw: head Ø9.17 × 2.54, 1/8 in hex keySTEP · STL
bhcs-10-32x12.70mm#10-32 × 0.5 in button head socket cap screw: head Ø9.17 × 2.54, 1/8 in hex keySTEP · STL
bhcs-1-4-20x9.52mm1/4-20 × 0.375 in button head socket cap screw: head Ø11.10 × 3.35, 5/32 in hex keySTEP · STL
bhcs-1-4-20x12.70mm1/4-20 × 0.5 in button head socket cap screw: head Ø11.10 × 3.35, 5/32 in hex keySTEP · STL
bhcs-1-4-20x15.88mm1/4-20 × 0.625 in button head socket cap screw: head Ø11.10 × 3.35, 5/32 in hex keySTEP · STL
bhcs-1-4-20x19.05mm1/4-20 × 0.75 in button head socket cap screw: head Ø11.10 × 3.35, 5/32 in hex keySTEP · STL
bhcs-1-4-20x25.40mm1/4-20 × 1 in button head socket cap screw: head Ø11.10 × 3.35, 5/32 in hex keySTEP · STL
bhcs-5-16-18x12.70mm5/16-18 × 0.5 in button head socket cap screw: head Ø13.89 × 4.22, 3/16 in hex keySTEP · STL
bhcs-5-16-18x15.88mm5/16-18 × 0.625 in button head socket cap screw: head Ø13.89 × 4.22, 3/16 in hex keySTEP · STL
bhcs-5-16-18x19.05mm5/16-18 × 0.75 in button head socket cap screw: head Ø13.89 × 4.22, 3/16 in hex keySTEP · STL
bhcs-5-16-18x25.40mm5/16-18 × 1 in button head socket cap screw: head Ø13.89 × 4.22, 3/16 in hex keySTEP · STL
bhcs-3-8-16x19.05mm3/8-16 × 0.75 in button head socket cap screw: head Ø16.66 × 5.05, 7/32 in hex keySTEP · STL
bhcs-3-8-16x25.40mm3/8-16 × 1 in button head socket cap screw: head Ø16.66 × 5.05, 7/32 in hex keySTEP · STL
bhcs-1-2-13x25.40mm1/2-13 × 1 in button head socket cap screw: head Ø22.22 × 6.73, 5/16 in hex keySTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=button-head-socket-screws-inch

Button head socket cap screws, inch: #4-40 to 1/2-13 (ASME B18.3), isometric render of a generated part
Render of bhcs-10-32x12.70mm from the free STEP; not to scale.

Fits with

Questions

What is the head of a 5/16-18 BHCS?

Ø0.547 in (13.89 mm) × 0.166 in (4.22 mm) high, 3/16 in hex key.