Library › Mechanisms › Belt and friction drives ·

Friction wheels (rolling contact drive), 30 : 60

How much torque can friction wheels transmit? · Hardware · basis: Xem Studio design following Brown No. 32 (1868)

Also called: friction drive, friction wheels, rolling contact drive, ruedas de fricción, Reibradgetriebe

Exact dimensions. True size, with no tolerance added.

sizes
3 in table

Notes

  • Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: wheels, centre distance; stays the same: ratio.
  • Resize: Speed ratio = driven Ø / driver Ø (or driven / driver teeth), independent of size. Timing belts and chain come in fixed pitches: keep the pitch and change the tooth counts, or step to the next standard pitch.
  • Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
  • Two plain wheels pressed together drive each other by friction at the line of contact: ratio = D₂/D₁ (2 : 1 here), opposite directions, and they slip instead of breaking when overloaded.
  • Torque at the small wheel ≈ μ·F·R₁: with rubber on steel (μ ≈ 0.6) and 50 N pressing, about 0.45 N·m. Centre distance = (D₁ + D₂)/2 = 45 mm, rims touching.
  • Brown's No. 32 (friction wheels with roughened or leather/rubber-covered rims).
  • Parts (each has its own page): friction-wheel-30x10, friction-wheel-60x10.
  • Brown's movement No. 32 (1868) shows it; this model is a Xem Studio design following his figure, every part at true size.

Friction wheels (rolling contact drive), 30 : 60 size chart

parametervalue
wheelsØ30 and Ø60 × 10
centre distance45 mm
ratio2 : 1

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 32: figure, his text and an animationwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
friction-wheels-mechanism-assemblyAssembled mechanism, all parts placed at one pose (STEP keeps each part separate)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=friction-wheels-mechanism

Friction wheels (rolling contact drive), 30 : 60, isometric render of a generated part
Render of friction-wheels-mechanism-assembly from the free STEP; not to scale.

Fits with

Questions

How much torque can friction wheels transmit?

Two plain wheels pressed together drive each other by friction at the line of contact: ratio = D₂/D₁ (2 : 1 here), opposite directions, and they slip instead of breaking when overloaded.