Library › Hardware › Fasteners ·

Hex nuts, inch: #4-40 to 3/4-10 (ASME B18.2.2)

What size is a 5/16-18 nut? · Standard part · basis: ASME B18.2.2 finished hex nuts and machine screw nuts: width across flats F, thickness H

Also called: 5/16 nut dimensions, 1/4-20 nut size, inch hex nut step

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
12 in table

Notes

  • Threads are plain cylinders at the major diameter, as every thread on this site. The bore is the major diameter.

Hex nuts, inch: #4-40 to 3/4-10 size chart

threadaf (in)thickness (in)
1/4-200.43750.2188
5/16-180.50.2656
3/8-160.56250.3281
7/16-140.68750.375
1/2-130.750.4375
5/8-110.93750.5469
3/4-101.1250.6406
#4-400.250.0938
#6-320.31250.1094
#8-320.34380.125
#10-240.3750.125
#10-320.3750.125

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
bore (thread as plain cylinder)major diameter per size: #4-40 Ø2.845 … 3/4-10 Ø19.05bolt or screw of the same thread (plain cylinder at the major Ø)designednut-*
hex bodyacross flats × thickness per size: #4-40 1/4 × 3/32 in; 1/4-20 7/16 × 7/32; 1/2-13 3/4 × 7/16; 3/4-10 1-1/8 × 41/64 in (see table)hex pocket that captures the nut: width = across flats, depth = thicknessslidenut-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ASMEASME B18.2.2 Nuts for general applications (inch)standardASME; dimensions are facts verify

Free files

★ Free files 12 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
nut-1-4-201/4-20 finished hex nut: 0.4375 in AF × 0.2188 inSTEP · STL
nut-5-16-185/16-18 finished hex nut: 0.5 in AF × 0.2656 inSTEP · STL
nut-3-8-163/8-16 finished hex nut: 0.5625 in AF × 0.3281 inSTEP · STL
nut-7-16-147/16-14 finished hex nut: 0.6875 in AF × 0.375 inSTEP · STL
nut-1-2-131/2-13 finished hex nut: 0.75 in AF × 0.4375 inSTEP · STL
nut-5-8-115/8-11 finished hex nut: 0.9375 in AF × 0.5469 inSTEP · STL
nut-3-4-103/4-10 finished hex nut: 1.125 in AF × 0.6406 inSTEP · STL
nut-4-40#4-40 machine screw nut: 0.25 in AF × 0.09375 inSTEP · STL
nut-6-32#6-32 machine screw nut: 0.3125 in AF × 0.1094 inSTEP · STL
nut-8-32#8-32 machine screw nut: 0.3438 in AF × 0.125 inSTEP · STL
nut-10-24#10-24 machine screw nut: 0.375 in AF × 0.125 inSTEP · STL
nut-10-32#10-32 machine screw nut: 0.375 in AF × 0.125 inSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=hex-nuts-inch

Hex nuts, inch: #4-40 to 3/4-10 (ASME B18.2.2), isometric render of a generated part
Render of nut-3-4-10 from the free STEP; not to scale.

Fits with

Hex bolts, inch: 1/4-20 to 3/4-10 (ASME B18.2.1), isometric render of a generated part
Hex bolts, inch: 1/4-20 to 3/4-10 (ASME B18.2.1)7 sizes★ 47 files
Flat washers, inch: SAE and USS, 1/4 to 3/4 in (ASME B18.21.1 Type A), isometric render of a generated part
Flat washers, inch: SAE and USS, 1/4 to 3/4 in (ASME B18.21.1 Type A)14 sizes★ 14 files
Socket head cap screws, inch: #10-24, #10-32, 5/16-18, 3/8-16, 1/2-13 (ASME B18.3), isometric render of a generated part
Socket head cap screws, inch: #10-24, #10-32, 5/16-18, 3/8-16, 1/2-13 (ASME B18.3)5 sizes★ 25 files
Button head socket cap screws, inch: #4-40 to 1/2-13 (ASME B18.3), isometric render of a generated part
Button head socket cap screws, inch: #4-40 to 1/2-13 (ASME B18.3)9 sizes★ 25 files
Imperial machine screws: #4-40, #6-32, #8-32, 1/4-20, isometric render of a generated part
Imperial machine screws: #4-40, #6-32, #8-32, 1/4-204 sizes★ 18 files
length
Wing nuts: DIN 315 M4–M24 and ASME B18.17 #4 to 3/4 — boss, wing spread, height, wing thickness31 sizes★ sheet
length
Nylon-insert lock nuts, inch (ASME B18.16.6): 1/4 to 1-1/2 width across flats, across corners, height14 sizes★ sheet
Plain washers, inch Type B (narrow, regular, wide): #0 to 3 in ID, OD, thickness + 12 washer files, isometric render of a generated part
Plain washers, inch Type B (narrow, regular, wide): #0 to 3 in ID, OD, thickness + 12 washer files63.5×63.5×4.1 mm★ 12 files
Threaded rod, inch: #4 to 4 in, UNC and UNF threads per inch, major diameter in inches and mm, standard lengths30 sizes★ sheet
Thread size reference: UNC / UNF and ISO metric coarse / fine — major, minor and pitch diameter, tap drill, clearance hole (close, normal, loose)201 sizes★ sheet
Hex nuts, hex jam nuts and heavy hex nuts, inch 7/8 to 1-1/2 (ASME B18.2.2): across flats, thickness, UNC / UNF, isometric render of a generated part
Hex nuts, hex jam nuts and heavy hex nuts, inch 7/8 to 1-1/2 (ASME B18.2.2): across flats, thickness, UNC / UNF66.0×57.15×38.227 mm★ 24 files
Hex cap screws and heavy hex screws, inch 7/8 to 1-1/2 (ASME B18.2.1): across flats F, head height H, thread length LT, isometric render of a generated part
Hex cap screws and heavy hex screws, inch 7/8 to 1-1/2 (ASME B18.2.1): across flats F, head height H, thread length LT44.0×38.1×126.3 mm★ 12 files
Slotted and castle nuts, inch (ASME B18.2.2): hex slotted 1/4 to 2 in, castle 1/4 to 1-1/4 in — across flats, height, slot width, cotter hole + envelope models, isometric render of a generated part
Slotted and castle nuts, inch (ASME B18.2.2): hex slotted 1/4 to 2 in, castle 1/4 to 1-1/4 in — across flats, height, slot width, cotter hole + envelope models12.8×11.1×5.6 mm★ 8 files
Coupling nuts / long hex nuts: DIN 6334 M8–M36 (height 3 d) and inch rod coupling nuts 1/4 to 1 in — across flats, length + M8–M36 envelope models, isometric render of a generated part
Coupling nuts / long hex nuts: DIN 6334 M8–M36 (height 3 d) and inch rod coupling nuts 1/4 to 1 in — across flats, length + M8–M36 envelope models15.0×13.0×24.0 mm★ 8 files
length
All-metal prevailing-torque lock nuts: DIN 980 V / M, ISO 7042 M5–M36 and inch Stover-type / top-lock nuts — across flats, height53 sizes★ sheet
length
Lug nuts and wheel bolts: thread sizes (M12x1.5, M12x1.25, M14x1.5, 1/2-20, 9/16-18), seat types (60° cone, ball R12 to R14, flat with washer) and hex sizes (17, 19, 21 mm, 13/16, 3/4 in)19 sizes★ sheet

Questions

5/16-18 nut?

1/2 in AF, 17/64 in thick.