Library › Hardware › Bearings, rails & motion ·

Linear rod Ø8 × 300

What size rod does an LM8UU run on? · Hardware · basis: Plain round Ø8 rod at the LM8UU bore

Also called: 8mm linear rod, 8mm smooth rod, 8mm rod 300mm, linear rod step

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
1 in table

Notes

  • A plain Ø8 rod, 300 long, square ends.
  • It carries LM8UU bearings and is held at the ends by SK8 supports.
  • For Ø8 shafts with D-flats or clip grooves see the metric shafts page.

Linear rod Ø8 × 300 size chart

fileØlength
rod-8x3008300

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
rodØ8LM8UU and 8 mm boressliderod-8x300*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

McMaster-CarrLinear ball bearings (free STEP/IGES/STL per part, for your own design use; no redistribution)STEP, IGES, STL, PDFMcMaster-Carr site terms: personal design use, no redistribution verify
WikipediaLinear-motion bearingwebCC BY-SA 4.0 (text)

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
rod-8x3008 mm rod, 300 mmSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=linear-rod-8mm

Linear rod Ø8 × 300, isometric render of a generated part
Render of rod-8x300 from the free STEP; not to scale.

Questions

What rod fits an LM8UU?

Ø8; this file is Ø8 × 300.

What holds the rod ends?

SK8 supports: Ø8 split clamp 20 mm above the base.