Library › Hardware › Bearings, rails & motion ·

LM8UU linear bearing Ø8 × Ø15 × 24

What are the LM8UU bearing dimensions? · Hardware · basis: Industry-standard LM8UU: dr 8, D 15, L 24; retaining-ring grooves 1.1 wide to Ø14.3, outer faces 17.5 apart

Also called: lm8uu dimensions, 8mm linear bearing, lm8uu step file, lm8uu groove, rodamiento lineal lm8uu, rolamento linear lm8uu

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
4 in table

Notes

  • Ø8 bore × Ø15 OD × 24 long.
  • Two retaining-ring grooves 1.1 wide, down to Ø14.3, with their outer faces 17.5 apart (grooves from 3.25 to 4.35 and 19.65 to 20.75 along the length).
  • Related sizes: LM8LUU 8 × 15 × 45; LM10UU 10 × 19 × 29; LM12UU 12 × 21 × 30.
  • The OD sits in a Ø15 housing (the SC8UU block) and the bore slides on an Ø8 rod; fits are under Mating features.

LM8UU linear bearing Ø8 × Ø15 × 24 size chart

featurevalue (mm)
bore8
OD15
length24
grooves1.1 wide to Ø14.3, 17.5 apart (outer faces)

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
bearing ODØ15 × 24housing borepresslm8uu*
boreØ88 mm rod (slides on it)designedlm8uu*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

McMaster-CarrLinear ball bearings (free STEP/IGES/STL per part, for your own design use; no redistribution)STEP, IGES, STL, PDFMcMaster-Carr site terms: personal design use, no redistribution verify
WikipediaLinear-motion bearingwebCC BY-SA 4.0 (text)

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
lm8uuLM8UU: Ø8 bore × Ø15 × 24; ring grooves 1.1 wide to Ø14.3, 17.5 apartSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=lm8uu-bearing

LM8UU linear bearing Ø8 × Ø15 × 24, isometric render of a generated part
Render of lm8uu from the free STEP; not to scale.

You might also need

Questions

What are LM8UU dimensions?

8 mm bore, 15 mm OD, 24 mm long, two grooves 1.1 wide to Ø14.3, 17.5 mm apart over their outer faces.

What housing bore does an LM8UU take?

Ø15, the bearing OD; the SC8UU block file has it.