Library › Hardware › Bearings, rails & motion ·

SC8UU slide block for an LM8UU

What are the dimensions of an SC8UU linear bearing block? · Hardware · basis: SC8UU catalogue envelope: 34 × 30 × 22, LM8UU at 11 mm, four M4 on 24 × 18

Also called: sc8uu dimensions, sc8uu stl, linear bearing block 8mm, sc8uu hole pattern

Long Earth Society build part. Flywheel shaft blocks and displacer guides on the LES engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
4 in table

Notes

  • A 34 × 30 × 22 block with R2 edges. A Ø15 bore (LM8UU OD) runs the 30 mm length on an axis 11 mm above the base.
  • Four Ø3.3 holes (M4 tap drill) run top to bottom on a 24 × 18 pattern.
  • The LM8UU sits in the Ø15 bore and rides an Ø8 rod; the fit is listed under Mating features.

SC8UU slide block for an LM8UU size chart

featurevalue (mm)
block34 × 30 × 22
bearing boreØ15 × 30
centre height11
holes4 × Ø3.3 (M4 tap) on 24 × 18

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
LM8UU pocketØ15LM8UU ODpressslide-block-*
mounting holesØ3.3M4 tap drilldesignedslide-block-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

McMaster-CarrMounted bearings (free STEP per part, for your own design use; no redistribution)STEP, PDFMcMaster-Carr site terms verify
McMaster-CarrSleeve bearings (free STEP per part, for your own design use; no redistribution)STEP, PDFMcMaster-Carr site terms verify
OpenBuildsSolid V wheel kitweb, STEPOpenBuilds site verify
WikipediaPlain bearingwebCC BY-SA 4.0 (text)
Long Earth SocietyEngine and rig buildsweb, videoLES site

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
slide-block-sc8uuSC8UU slide block: Ø15 LM8UU pocket, 34 × 30 × 22, four Ø3.3 (M4 tap drill) holes on 24 × 18, 11 mm centre heightSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=slide-block-sc8uu

SC8UU slide block for an LM8UU, isometric render of a generated part
Render of slide-block-sc8uu from the free STEP; not to scale.

Questions

What are SC8UU dimensions?

34 × 30 × 22, LM8UU (Ø15) bore 11 mm above the base, four M4 holes on 24 × 18.

What bearing goes in an SC8UU?

One LM8UU (Ø8 × Ø15 × 24) in the Ø15 × 30 bore.