Library › Electronic components › Motors ·

N20 micro gearmotor 12 × 10 mm, Ø3 D-shaft

What is the N20 motor size and shaft diameter? · Hardware · basis: Common supplier drawings for the N20 micro metal gearmotor; gearbox length varies by ratio

Also called: n20 motor, n20 motor dimensions, micro gearmotor size, n20 shaft size, n20 motor stl, motorreductor n20 medidas, motor n20 dimensões

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
5 in table

Notes

  • The N20 is 12 × 10 mm in section: a 15 mm motor with R2 rounded edges plus a gearbox 9–12 mm long depending on ratio; the file has the 9 mm gearbox (24 mm body).
  • The output is a Ø3 D-shaft, 2.5 mm across the flat, 10 mm long; 34 mm overall.
  • The gearbox face has two M1.6 holes 9 mm apart, drawn as Ø1.6 × 4 deep.

N20 micro gearmotor 12 × 10 mm, Ø3 D-shaft size chart

featuresize (mm)
section12 × 10
motor15
gearbox (this file)9
shaftØ3 D, 2.5 across flat × 10
face holes2 × M1.6 on 9

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
N20 shaftØ3 D (2.5 across the flat)wheel hubpressmotor-n20-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

PololuMicro metal gearmotor dimension diagramPDF, STEPPololu site terms verify
DFRobotTT geared motor drawingwebDFRobot site terms verify
WikipediaDC motorwebCC BY-SA 4.0 (text)

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
motor-n20-9mm-gearboxN20 micro gearmotor: 12 × 10 × 15 motor + 9 mm gearbox, Ø3 D-shaft (2.5 across the flat) × 10STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=n20-gearmotor

N20 micro gearmotor 12 × 10 mm, Ø3 D-shaft, isometric render of a generated part
Render of motor-n20-9mm-gearbox from the free STEP; not to scale.

You might also need

Questions

What is the N20 motor shaft size?

3 mm D-shaft, 2.5 mm across the flat, about 10 mm long.

How long is an N20 gearmotor?

15 mm motor plus a 9–12 mm gearbox; the file is 24 mm body, 34 mm with the shaft.