Library › Electronic components › Motors ·

TT yellow gearmotor 70 × 22.5 × 18.5 mm, Ø5.5 double-D shafts

What are TT motor mounting dimensions? · Hardware · basis: Common supplier drawings for the yellow TT (1:48) gearmotor; clones vary by about ±0.5 mm

Also called: tt motor, yellow motor dimensions, tt gear motor stl, tt motor shaft size, tt motor mounting holes, motorreductor amarillo medidas, motor amarillo arduino, motor dc com caixa de redução amarelo

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
5 in table

Notes

  • The TT envelope is a 37 × 22.5 × 18.5 mm gearbox plus a Ø18.5 × 33 motor: 70 × 22.5 × 18.5 overall.
  • The output is a Ø5.5 double-D shaft, 3.7 mm across the flats, sticking out 9.5 mm on both sides (41.5 across).
  • Two Ø3.2 holes run through the gearbox's 22.5 mm width, 17.6 mm apart along its length and 17.5 mm apart in height.
  • Many clones vary by about ±0.5 mm.

TT yellow gearmotor 70 × 22.5 × 18.5 mm, Ø5.5 double-D shafts size chart

featuresize (mm)
overall70 × 22.5 × 18.5
gearbox37 × 22.5 × 18.5
shaftØ5.5 double-D, 3.7 across flats
shaft span41.5
holes2 × Ø3.2

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
TT shaftØ5.5 double-D, 3.7 across the flatswheel hubpressmotor-tt-*
mounting holesØ3.2 × 2, 17.6 apartM3 screws through the gearboxdesignedmotor-tt-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

PololuMicro metal gearmotor dimension diagramPDF, STEPPololu site terms verify
DFRobotTT geared motor drawingwebDFRobot site terms verify
WikipediaDC motorwebCC BY-SA 4.0 (text)

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
motor-tt-dual-shaftTT gearmotor envelope: 70 long (37 gearbox + 33 motor), 22.5 tall × 18.8 thick, Ø5.5 double-D output shaft (3.7 across the flats) 37 tip to tip, 25.8 from the motor end of the gearbox; two Ø3.2 mounting holes through the 18.8 thickness, 5 from the motor end, 17.6 apart one above the other (0.85 mm of wall to the top and bottom faces)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tt-gearmotor

TT yellow gearmotor 70 × 22.5 × 18.5 mm, Ø5.5 double-D shafts, isometric render of a generated part
Render of motor-tt-dual-shaft from the free STEP; not to scale.

You might also need

Questions

What are TT motor dimensions?

70 × 22.5 × 18.5 mm overall with a Ø5.5 double-D shaft (3.7 across the flats) on both sides.

What wheel fits a TT motor?

Any hub with the Ø5.5 double-D, 3.7 mm across the flats; the standard yellow wheels are 65 mm.