Library › Hardware › Mounting standards ·
Pegboard hooks, printable: J, double and straight, 1 to 6 in reach (¼ in holes, 1 in pitch)
What pegboard hooks fit standard ¼ inch pegboard? · Hardware · basis: Xem Studio design: two pegs 1 in apart (the standard pitch), Ø4.6 for ¼ in holes, the upper one hooked behind a ¼ in board, on a back plate with the arm
Also called: pegboard hook stl, 1/4 pegboard hooks printable
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 12 in table
Notes
- Hang the upper peg through and down behind the board; the lower peg keeps it square.
Pegboard hooks, printable: J, double and straight, 1 to 6 in reach size chart
| kind | reach (in) |
|---|---|
| J hook | 1.0 |
| J hook | 2.0 |
| J hook | 3.5 |
| J hook | 6.0 |
| double U hook | 1.0 |
| double U hook | 2.0 |
| double U hook | 3.5 |
| double U hook | 6.0 |
| straight peg | 1.0 |
| straight peg | 2.0 |
| straight peg | 3.5 |
| straight peg | 6.0 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| pegs | 2 × Ø4.6, 25.4 (1 in) apart | ¼ in pegboard holes on 1 in pitch; upper peg goes through and down behind a ¼ in board, lower peg keeps the hook square | slide | peg-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| 80/20 | 15 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware) | web | maker's catalogue; numbers cited |
Free files
★ Free files 12 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| peg-j-1in | J hook, 1 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-j-2in | J hook, 2 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-j-3.5in | J hook, 3.5 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-j-6in | J hook, 6 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-u-1in | double U hook, 1 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-u-2in | double U hook, 2 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-u-3.5in | double U hook, 3.5 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-u-6in | double U hook, 6 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-straight-1in | straight peg, 1 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-straight-2in | straight peg, 2 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-straight-3.5in | straight peg, 3.5 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
| peg-straight-6in | straight peg, 6 in reach: two Ø4.6 pegs 1 in apart for ¼ in holes in ¼ in board | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=pegboard-hooks

Fits with






Questions
Which board?
¼ in pegboard with ¼ in holes on 1 in centres.