Library › Hardware › Bearings, rails & motion ·

Pillow block KP08 envelope with a 608 pocket

What are the dimensions of a KP08 pillow block? · Hardware · basis: KP08 catalogue envelope (55 × 13 base, 15 mm centre height, M5 holes 42 apart) with a Ø22 pocket at the 608 OD

Also called: kp08 dimensions, kp08 pillow block step, pillow block 8mm, kp08 stl, 608 pillow block

Long Earth Society build part. Flywheel shaft blocks and displacer guides on the LES engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
5 in table

Notes

  • A 55 × 13 block with R3 rounded ends; a Ø22 pocket (608 OD) runs through the 13 mm thickness on an axis 15 mm above the base.
  • Two Ø5.5 holes (M5 clearance) through the base, 42 mm apart.
  • The file is 25 mm tall. The catalogue KP08 housing stands 29; the top 4 mm is not drawn on this file, so the Ø22 pocket breaks out through the top face as a 9.2 mm wide opening.
  • The 608 sits in the Ø22 pocket and carries a Ø8 shaft; the fit is listed under Mating features.

Pillow block KP08 envelope with a 608 pocket size chart

featurevalue (mm)
base55 × 13
height (file)25
centre height15
bearing pocketØ22 through 13
mounting holes2 × Ø5.5 at 42

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
bearing pocketØ22608 bearingpresspillow-block-*
mounting holesØ5.5M5 screw clearancedesignedpillow-block-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

McMaster-CarrMounted bearings (free STEP per part, for your own design use; no redistribution)STEP, PDFMcMaster-Carr site terms verify
McMaster-CarrSleeve bearings (free STEP per part, for your own design use; no redistribution)STEP, PDFMcMaster-Carr site terms verify
OpenBuildsSolid V wheel kitweb, STEPOpenBuilds site verify
WikipediaPlain bearingwebCC BY-SA 4.0 (text)
Long Earth SocietyEngine and rig buildsweb, videoLES site

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
pillow-block-kp08KP08 pillow block: 29 overall height, 15 mm centre height, 55 × 13 × 5 base, Ø28 boss, Ø22 pocket for a 608 bearing through the 13 width (3 mm wall over it), two Ø5.5 (M5 clearance) holes 42 mm apartSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=pillow-block-kp08

Pillow block KP08 envelope with a 608 pocket, isometric render of a generated part
Render of pillow-block-kp08 from the free STEP; not to scale.

You might also need

Questions

What are KP08 dimensions?

55 × 13 base, Ø8 shaft 15 mm above the base, two M5 holes 42 mm apart. This file is 25 tall with a Ø22 pocket for a 608.

What bearing goes in the KP08 file?

A 608 (8 × 22 × 7) in the Ø22 pocket.