Library › Hardware › Pistons, cylinders & rods ·
Pistons Ø48.00 × 72 for a bored 2 in spool
What 72 mm long piston fits a 2 inch spool bored to 48 mm? · Hardware · basis: Exact geometry at the finished bore Ø48.00
Also called: 48 mm stirling piston, tri clamp piston bored spool
Long Earth Society build part. Parts of the HTD engines. Long Earth Society
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 1 in table
Notes
- Ring-less: the seal is the fit. Two 8 lands carry it, 0.4 relief between them, 72 long (1.5 × bore) so it cannot cock. The crown faces the working space (down).
- The con-rod runs beside the axis (x 10.5..15.5) between two cheeks; the displacer rod passes up the centre tube (main piston) without touching the con-rod. The offset puts a small tilting moment on the piston, which the 72 length carries.
Pistons Ø48.00 × 72 for a bored 2 in spool size chart
| part | od (mm) | length (mm) | centre bore (mm) | pin |
|---|---|---|---|---|
| piston-48-rod6 | 48.0 | 72.0 | 6.0 | Ø5 at z 86, x 5..21 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| OD | Ø48.00, two 8 lands | bored spool Ø48.00 (ring-less clearance seal) | run | all |
| centre bore | Ø6 × 72 | displacer rod (also the bleed to the crankcase) | run | piston-48-rod6* |
| pin bore | Ø5 in both cheeks | dowel-5x16 | press | all |
| cheek gap | 6.0 (x 10..16) | 5 thick con-rod (0.5 each side) | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Long Earth Society | Engine builds | web, video | LES site |
Free files
★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| piston-48-rod6 | Ø48.00 × 72 power piston: two 8 lands, 0.4 relief, 8 crown, Ø14 centre tube with the Ø6 displacer-rod bore, cross bar and two cheeks with a Ø5 pin bore 14 above the skirt (con-rod at x 10.5..15.5) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=pistons-48x72

Fits with
Questions
How does the displacer rod get past the piston?
Through the piston's centre tube (Ø6 running fit, 72 long), which is also the bleed between working space and crankcase.

