Library › Tri-clamp & pipe › Clamp fittings ·

DIN 32676 clamp blank caps, 34 to 183 mm flange

What blank cap fits a DIN 32676 DN50 clamp? · Hardware · basis: Flange per the Rubber Fab chart; cap thickness drawn by Xem Studio (5 to 11.1 mm by flange size); ISO 2852 face

Also called: din 32676 end cap, 34mm clamp cap, metric tri clamp cap

Exact dimensions. True size, with no tolerance added.

sizes
8 in table

Notes

  • One cap per flange size; it closes every DN that shares that flange.
  • Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

DIN 32676 clamp blank caps, 34 to 183 mm flange size chart

flange (mm)dnthickness (mm)
34.0DN10, DN15, DN205.0
50.5DN25, DN32, DN406.35
64.0DN506.35
91.0DN656.35
106.0DN807.0
119.0DN1007.94
155.0DN1259.5
183.0DN15011.1

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

DINDIN 32676 clamp connections, series A on DIN 11850 tube (DN10–DN150): flange and bead per the Rubber Fab chartstandardDIN; dimensions are facts verify
Rubber FabTri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)PDFpublisher's chart; dimensions cited, nothing copied
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 8 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
cap-34mmblank cap for the 34 mm flange (DN10, DN15, DN20): 5.00 thickSTEP · STL
cap-50.5mmblank cap for the 50.5 mm flange (DN25, DN32, DN40): 6.35 thickSTEP · STL
cap-64mmblank cap for the 64 mm flange (DN50): 6.35 thickSTEP · STL
cap-91mmblank cap for the 91 mm flange (DN65): 6.35 thickSTEP · STL
cap-106mmblank cap for the 106 mm flange (DN80): 7.00 thickSTEP · STL
cap-119mmblank cap for the 119 mm flange (DN100): 7.94 thickSTEP · STL
cap-155mmblank cap for the 155 mm flange (DN125): 9.50 thickSTEP · STL
cap-183mmblank cap for the 183 mm flange (DN150): 11.10 thickSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-din-32676-caps

DIN 32676 clamp blank caps, 34 to 183 mm flange, isometric render of a generated part
Render of cap-106mm from the free STEP; not to scale.

Fits with

Questions

Which cap for DN50?

The 64 mm cap.