Library › Tri-clamp & pipe › Clamp fittings ·
DIN 32676 clamp gaskets (Type B profile), DN10 to DN150
What gasket fits a DIN 32676 DN25 clamp? · Standard part · basis: Bead diameter per the Rubber Fab chart; ISO 2852 Type B section; bore per DIN 11850 tube
Also called: din 32676 gasket, metric clamp gasket, dn40 gasket
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 12 in table
Notes
- The bead diameter follows the flange; the inner lip follows the tube, so a DN25 and a 1 in gasket share a flange but not a lip.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.
DIN 32676 clamp gaskets (Type B profile), DN10 to DN150 size chart
| dn | od (mm) | bead (mm) | lip id (mm) |
|---|---|---|---|
| DN10 | 33.0 | 27.5 | 7.8 |
| DN15 | 33.0 | 27.5 | 13.8 |
| DN20 | 33.0 | 27.5 | 17.8 |
| DN25 | 49.5 | 43.5 | 23.8 |
| DN32 | 49.5 | 43.5 | 29.8 |
| DN40 | 49.5 | 43.5 | 35.8 |
| DN50 | 63.0 | 56.5 | 47.8 |
| DN65 | 90.0 | 83.5 | 63.8 |
| DN80 | 105.0 | 97.0 | 78.8 |
| DN100 | 118.0 | 110.0 | 97.8 |
| DN125 | 154.0 | 146.0 | 122.8 |
| DN150 | 182.0 | 174.0 | 147.8 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| gasket | bead Ø follows the flange, inner lip follows the tube (DN25 and 1 in share a flange, not a lip) | metric flange groove of the same size | designed | gasket-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Rubber Fab | Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676) | publisher's chart; dimensions cited, nothing copied | |
| DIN | DIN 32676 clamp connections, series A on DIN 11850 tube (DN10–DN150): flange and bead per the Rubber Fab chart | standard | DIN; dimensions are facts verify |
| Rubber Fab | Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) | maker chart; dimensions are facts verify |
Free files
★ Free files 12 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| gasket-dn10 | DN10 gasket: OD 33, bead Ø27.5, lip ID 7.8 | STEP · STL |
| gasket-dn15 | DN15 gasket: OD 33, bead Ø27.5, lip ID 13.8 | STEP · STL |
| gasket-dn20 | DN20 gasket: OD 33, bead Ø27.5, lip ID 17.8 | STEP · STL |
| gasket-dn25 | DN25 gasket: OD 49.5, bead Ø43.5, lip ID 23.8 | STEP · STL |
| gasket-dn32 | DN32 gasket: OD 49.5, bead Ø43.5, lip ID 29.8 | STEP · STL |
| gasket-dn40 | DN40 gasket: OD 49.5, bead Ø43.5, lip ID 35.8 | STEP · STL |
| gasket-dn50 | DN50 gasket: OD 63, bead Ø56.5, lip ID 47.8 | STEP · STL |
| gasket-dn65 | DN65 gasket: OD 90, bead Ø83.5, lip ID 63.8 | STEP · STL |
| gasket-dn80 | DN80 gasket: OD 105, bead Ø97, lip ID 78.8 | STEP · STL |
| gasket-dn100 | DN100 gasket: OD 118, bead Ø110, lip ID 97.8 | STEP · STL |
| gasket-dn125 | DN125 gasket: OD 154, bead Ø146, lip ID 122.8 | STEP · STL |
| gasket-dn150 | DN150 gasket: OD 182, bead Ø174, lip ID 147.8 | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-din-32676-gaskets

Fits with
Questions
Can I use a 1½ in gasket on DN40?
It seals on the same bead; its lip is 1.5 mm smaller than the DN40 bore, so it stands slightly into the flow.

