Library › Hardware › Framing ·
Cantilever shelf plates for 15-series posts: 8 to 16 in reach
How do I hang a shelf off a single 1515 post? · Hardware · basis: Xem Studio design: a ¼ in triangular plate: its vertical leg bolts to the post, its top edge carries a 1515 shelf rail; 5/16-18 holes on the rail centre lines
Also called: t slot cantilever shelf, 1515 shelf bracket
Exact dimensions. True size, with no tolerance added.
- sizes
- 4 in table
Notes
- One plate each side of the rail, or one on the outside; the rail then carries a shelf board.
Cantilever shelf plates for 15-series posts: 8 to 16 in reach size chart
| reach (in) | plate (in) | holes |
|---|---|---|
| 8 | 0.25 | 5 |
| 10 | 0.25 | 5 |
| 12 | 0.25 | 5 |
| 16 | 0.25 | 5 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| 80/20 | 15 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware) | web | maker's catalogue; numbers cited |
Free files
★ Free files 4 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| cantilever-plate-8in | 8 in cantilever shelf plate, ¼ in thick: two holes on the post, three under the shelf rail (5 Ø8.73) | STEP · STL |
| cantilever-plate-10in | 10 in cantilever shelf plate, ¼ in thick: two holes on the post, three under the shelf rail (5 Ø8.73) | STEP · STL |
| cantilever-plate-12in | 12 in cantilever shelf plate, ¼ in thick: two holes on the post, three under the shelf rail (5 Ø8.73) | STEP · STL |
| cantilever-plate-16in | 16 in cantilever shelf plate, ¼ in thick: two holes on the post, three under the shelf rail (5 Ø8.73) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=t-slot-cantilever-shelf-plates

Fits with





Questions
Load?
Depends on the plate material: print it for light duty or cut it from ¼ in aluminium plate.