Library › Hardware › Framing ·
Drawer boxes and faces for T-slot bench bays: 22 to 44 in wide, 3 to 8 in faces
What size drawer fits a T-slot bench bay? · Hardware · basis: Xem Studio design: a box 1 in narrower than the bay (½ in each side for the slides), ¾ in lower than its face; a ¾ in face with a pull
Also called: t slot drawer, workbench drawer box
Exact dimensions. True size, with no tolerance added.
- sizes
- 20 in table
Notes
- Faces overlap the bay by ¼ in each side.
Drawer boxes and faces for T-slot bench bays: 22 to 44 in wide, 3 to… size chart
| bay (in) | face h (in) | box (in) |
|---|---|---|
| 22 | 3 | 21 × 18 × 2.25 |
| 22 | 4 | 21 × 18 × 3.25 |
| 22 | 5 | 21 × 18 × 4.25 |
| 22 | 6 | 21 × 18 × 5.25 |
| 22 | 8 | 21 × 18 × 7.25 |
| 28 | 3 | 27 × 18 × 2.25 |
| 28 | 4 | 27 × 18 × 3.25 |
| 28 | 5 | 27 × 18 × 4.25 |
| 28 | 6 | 27 × 18 × 5.25 |
| 28 | 8 | 27 × 18 × 7.25 |
| 34 | 3 | 33 × 18 × 2.25 |
| 34 | 4 | 33 × 18 × 3.25 |
| 34 | 5 | 33 × 18 × 4.25 |
| 34 | 6 | 33 × 18 × 5.25 |
| 34 | 8 | 33 × 18 × 7.25 |
| 44 | 3 | 43 × 18 × 2.25 |
| 44 | 4 | 43 × 18 × 3.25 |
| 44 | 5 | 43 × 18 × 4.25 |
| 44 | 6 | 43 × 18 × 5.25 |
| 44 | 8 | 43 × 18 × 7.25 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| 80/20 | 15 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware) | web | maker's catalogue; numbers cited |
Free files
★ Free files 40 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| drawer-box-22x18x3in | drawer box for a 22 in bay: 21 × 18 × 2.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-22x3in | drawer face 22.5 × 3 in, ¾ in, with a pull | STEP · STL |
| drawer-box-22x18x4in | drawer box for a 22 in bay: 21 × 18 × 3.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-22x4in | drawer face 22.5 × 4 in, ¾ in, with a pull | STEP · STL |
| drawer-box-22x18x5in | drawer box for a 22 in bay: 21 × 18 × 4.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-22x5in | drawer face 22.5 × 5 in, ¾ in, with a pull | STEP · STL |
| drawer-box-22x18x6in | drawer box for a 22 in bay: 21 × 18 × 5.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-22x6in | drawer face 22.5 × 6 in, ¾ in, with a pull | STEP · STL |
| drawer-box-22x18x8in | drawer box for a 22 in bay: 21 × 18 × 7.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-22x8in | drawer face 22.5 × 8 in, ¾ in, with a pull | STEP · STL |
| drawer-box-28x18x3in | drawer box for a 28 in bay: 27 × 18 × 2.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-28x3in | drawer face 28.5 × 3 in, ¾ in, with a pull | STEP · STL |
| drawer-box-28x18x4in | drawer box for a 28 in bay: 27 × 18 × 3.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-28x4in | drawer face 28.5 × 4 in, ¾ in, with a pull | STEP · STL |
| drawer-box-28x18x5in | drawer box for a 28 in bay: 27 × 18 × 4.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-28x5in | drawer face 28.5 × 5 in, ¾ in, with a pull | STEP · STL |
| drawer-box-28x18x6in | drawer box for a 28 in bay: 27 × 18 × 5.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-28x6in | drawer face 28.5 × 6 in, ¾ in, with a pull | STEP · STL |
| drawer-box-28x18x8in | drawer box for a 28 in bay: 27 × 18 × 7.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-28x8in | drawer face 28.5 × 8 in, ¾ in, with a pull | STEP · STL |
| drawer-box-34x18x3in | drawer box for a 34 in bay: 33 × 18 × 2.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-34x3in | drawer face 34.5 × 3 in, ¾ in, with a pull | STEP · STL |
| drawer-box-34x18x4in | drawer box for a 34 in bay: 33 × 18 × 3.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-34x4in | drawer face 34.5 × 4 in, ¾ in, with a pull | STEP · STL |
| drawer-box-34x18x5in | drawer box for a 34 in bay: 33 × 18 × 4.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-34x5in | drawer face 34.5 × 5 in, ¾ in, with a pull | STEP · STL |
| drawer-box-34x18x6in | drawer box for a 34 in bay: 33 × 18 × 5.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-34x6in | drawer face 34.5 × 6 in, ¾ in, with a pull | STEP · STL |
| drawer-box-34x18x8in | drawer box for a 34 in bay: 33 × 18 × 7.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-34x8in | drawer face 34.5 × 8 in, ¾ in, with a pull | STEP · STL |
| drawer-box-44x18x3in | drawer box for a 44 in bay: 43 × 18 × 2.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-44x3in | drawer face 44.5 × 3 in, ¾ in, with a pull | STEP · STL |
| drawer-box-44x18x4in | drawer box for a 44 in bay: 43 × 18 × 3.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-44x4in | drawer face 44.5 × 4 in, ¾ in, with a pull | STEP · STL |
| drawer-box-44x18x5in | drawer box for a 44 in bay: 43 × 18 × 4.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-44x5in | drawer face 44.5 × 5 in, ¾ in, with a pull | STEP · STL |
| drawer-box-44x18x6in | drawer box for a 44 in bay: 43 × 18 × 5.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-44x6in | drawer face 44.5 × 6 in, ¾ in, with a pull | STEP · STL |
| drawer-box-44x18x8in | drawer box for a 44 in bay: 43 × 18 × 7.25 in, ½ in sides, ¼ in bottom | STEP · STL |
| drawer-face-44x8in | drawer face 44.5 × 8 in, ¾ in, with a pull | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=t-slot-drawer-boxes-and-faces

Fits with





Questions
Slides?
18 in slides on t-slot-drawer-slides-and-adapters.