Library › Hardware › Framing ·
Drawer slides for 15-series benches: 12 to 24 in slide envelopes and slide-to-upright plates
How do I mount drawer slides on a T-slot frame? · Hardware · basis: Xem Studio design: 45 mm × ½ in (12.7) side-mount ball-bearing slide envelope at each nominal length, and a ¼ in plate that spans the bay between two 1515 uprights and carries the slide on a 32 mm hole row
Also called: t slot drawer slides, 1515 drawer mounting
Exact dimensions. True size, with no tolerance added.
- sizes
- 7 in table
Notes
- Slide hole patterns differ by maker: the envelope is for space, the plate's 32 mm row suits most; drill your slide's own holes if they differ.
- Leave ½ in (12.7) each side between the drawer box and the plate for the slide.
Drawer slides for 15-series benches: 12 to 24 in slide envelopes and… size chart
| length (in) | height (mm) | thickness (mm) |
|---|---|---|
| 12 | 45.0 | 12.7 |
| 14 | 45.0 | 12.7 |
| 16 | 45.0 | 12.7 |
| 18 | 45.0 | 12.7 |
| 20 | 45.0 | 12.7 |
| 22 | 45.0 | 12.7 |
| 24 | 45.0 | 12.7 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| 80/20 | 15 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware) | web | maker's catalogue; numbers cited |
Free files
★ Free files 14 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| drawer-slide-envelope-12in | 12 in side-mount ball-bearing slide envelope (closed), 45 × 12.7 mm, Ø4.5 holes every 32 mm (check your slide) | STEP · STL |
| slide-adapter-plate-12in | plate for a 12 in slide between two 1515 uprights: two Ø8.73 holes each end, Ø4.2 tap-size holes every 32 mm along the centre | STEP · STL |
| drawer-slide-envelope-14in | 14 in side-mount ball-bearing slide envelope (closed), 45 × 12.7 mm, Ø4.5 holes every 32 mm (check your slide) | STEP · STL |
| slide-adapter-plate-14in | plate for a 14 in slide between two 1515 uprights: two Ø8.73 holes each end, Ø4.2 tap-size holes every 32 mm along the centre | STEP · STL |
| drawer-slide-envelope-16in | 16 in side-mount ball-bearing slide envelope (closed), 45 × 12.7 mm, Ø4.5 holes every 32 mm (check your slide) | STEP · STL |
| slide-adapter-plate-16in | plate for a 16 in slide between two 1515 uprights: two Ø8.73 holes each end, Ø4.2 tap-size holes every 32 mm along the centre | STEP · STL |
| drawer-slide-envelope-18in | 18 in side-mount ball-bearing slide envelope (closed), 45 × 12.7 mm, Ø4.5 holes every 32 mm (check your slide) | STEP · STL |
| slide-adapter-plate-18in | plate for a 18 in slide between two 1515 uprights: two Ø8.73 holes each end, Ø4.2 tap-size holes every 32 mm along the centre | STEP · STL |
| drawer-slide-envelope-20in | 20 in side-mount ball-bearing slide envelope (closed), 45 × 12.7 mm, Ø4.5 holes every 32 mm (check your slide) | STEP · STL |
| slide-adapter-plate-20in | plate for a 20 in slide between two 1515 uprights: two Ø8.73 holes each end, Ø4.2 tap-size holes every 32 mm along the centre | STEP · STL |
| drawer-slide-envelope-22in | 22 in side-mount ball-bearing slide envelope (closed), 45 × 12.7 mm, Ø4.5 holes every 32 mm (check your slide) | STEP · STL |
| slide-adapter-plate-22in | plate for a 22 in slide between two 1515 uprights: two Ø8.73 holes each end, Ø4.2 tap-size holes every 32 mm along the centre | STEP · STL |
| drawer-slide-envelope-24in | 24 in side-mount ball-bearing slide envelope (closed), 45 × 12.7 mm, Ø4.5 holes every 32 mm (check your slide) | STEP · STL |
| slide-adapter-plate-24in | plate for a 24 in slide between two 1515 uprights: two Ø8.73 holes each end, Ø4.2 tap-size holes every 32 mm along the centre | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=t-slot-drawer-slides-and-adapters

Fits with





Questions
Drawer width?
Bay inside width − 2 × 12.7 mm.