Library › Hardware › Framing ·

Gravity roller conveyor on 15-series side frames: 1.9 in rollers, 7/16 hex axles, 3 in pitch

How do I build a roller conveyor from T-slot extrusion? · Hardware · basis: Xem Studio design: Ø1.9 in rollers on 7/16 in hex axles (the common gravity-conveyor sizes) between two 1515 side frames, holes at a 3 in pitch on the rail centre line; legs from 1515 set the roller-top height

Also called: t slot roller conveyor, gravity conveyor 1.9 roller

Exact dimensions. True size, with no tolerance added.

sizes
3 in table

Notes

  • Roller top = side-frame centre line + 0.95 in. Set leg length so that sits at your bench height.

Gravity roller conveyor on 15-series side frames: 1.9 in rollers… size chart

between frames (in)roller (in)axle hex (in)pitch (in)
181.90.43753
241.90.43753
301.90.43753

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

80/2015 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware)webmaker's catalogue; numbers cited

Free files

★ Free files 10 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
roller-1.9in-for-18inØ1.9 in roller, 18 in between frames, 1.65 wall, 7/16 hex boreSTEP · STL
hex-axle-7-16in-for-18in7/16 in hex axle, 21 in (through both 1515 side frames)STEP · STL
roller-1.9in-for-24inØ1.9 in roller, 24 in between frames, 1.65 wall, 7/16 hex boreSTEP · STL
hex-axle-7-16in-for-24in7/16 in hex axle, 27 in (through both 1515 side frames)STEP · STL
roller-1.9in-for-30inØ1.9 in roller, 30 in between frames, 1.65 wall, 7/16 hex boreSTEP · STL
hex-axle-7-16in-for-30in7/16 in hex axle, 33 in (through both 1515 side frames)STEP · STL
side-frame-drill-plate-24indrill plate for a 24 in 1515 side frame: 8 hex holes at 3 in pitch on the centre lineSTEP · STL
side-frame-drill-plate-36indrill plate for a 36 in 1515 side frame: 12 hex holes at 3 in pitch on the centre lineSTEP · STL
side-frame-drill-plate-48indrill plate for a 48 in 1515 side frame: 16 hex holes at 3 in pitch on the centre lineSTEP · STL
side-frame-drill-plate-60indrill plate for a 60 in 1515 side frame: 20 hex holes at 3 in pitch on the centre lineSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=t-slot-gravity-roller-conveyor

Gravity roller conveyor on 15-series side frames: 1.9 in rollers, 7/16 hex axles, 3 in pitch, isometric render of a generated part
Render of hex-axle-7-16in-for-30in from the free STEP; not to scale.

Fits with

Questions

Roller top height?

Side-frame centre line + 0.95 in.