Library › Hardware › Framing ·

Monitor mount for a 1515 post: VESA 75 / 100 plate, post clamp and arm segments

How do I mount a monitor on a T-slot frame? · Hardware · basis: Xem Studio design: a post clamp that bolts to a vertical 1515 through two T-nuts each side, arm segments with Ø12 pin pivots, and a VESA 75 / 100 plate

Also called: t slot monitor mount, 1515 monitor arm

Exact dimensions. True size, with no tolerance added.

sizes
3 in table

Notes

  • Two segments reach about 14 to 24 in. Check the monitor's weight against your material; VESA 75 and 100 use M4 screws.

Monitor mount for a 1515 post: VESA 75 / 100 plate, post clamp and… size chart

segment (mm)
180
250
300

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

80/2015 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware)webmaker's catalogue; numbers cited

Free files

★ Free files 5 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
vesa-75-100-plateVESA plate 120 × 120 × 6: M4 holes on 75 and 100 mm squares, Ø12 pivot pinSTEP · STL
post-clamp-15151515 post clamp, 3 in tall: wraps three faces, four 5/16 holes into T-nuts, Ø12 socket for the arm pinSTEP · STL
arm-segment-180mmarm segment 180 mm between pivots: Ø12 socket one end, Ø11.8 pin the otherSTEP · STL
arm-segment-250mmarm segment 250 mm between pivots: Ø12 socket one end, Ø11.8 pin the otherSTEP · STL
arm-segment-300mmarm segment 300 mm between pivots: Ø12 socket one end, Ø11.8 pin the otherSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=t-slot-monitor-mount

Monitor mount for a 1515 post: VESA 75 / 100 plate, post clamp and arm segments, isometric render of a generated part
Render of arm-segment-180mm from the free STEP; not to scale.

Fits with

Questions

Which VESA?

75 × 75 and 100 × 100 mm, M4.