Library › Hardware › Framing ·

Parts bins and bin rail for 15-series benches

How do I hang parts bins on a T-slot frame? · Hardware · basis: Xem Studio design: open-front bins with a back hook that drops over a lipped rail; the rail bolts to a 1515 face through 5/16-18 holes every 6 in

Also called: t slot parts bins, louver rail bins printable

Exact dimensions. True size, with no tolerance added.

sizes
5 in table

Notes

  • Bins lift off and move along the rail.

Parts bins and bin rail for 15-series benches size chart

bin (in)
4 × 5 × 3
4 × 7 × 3
5.5 × 9 × 5
8 × 11 × 7
11 × 11 × 5

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

80/2015 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware)webmaker's catalogue; numbers cited

Free files

★ Free files 10 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
parts-bin-4x5x3inopen-front bin 4 × 5 × 3 in, 2 mm walls, back hook for the bin railSTEP · STL
parts-bin-4x7x3inopen-front bin 4 × 7 × 3 in, 2 mm walls, back hook for the bin railSTEP · STL
parts-bin-5.5x9x5inopen-front bin 5.5 × 9 × 5 in, 2 mm walls, back hook for the bin railSTEP · STL
parts-bin-8x11x7inopen-front bin 8 × 11 × 7 in, 2 mm walls, back hook for the bin railSTEP · STL
parts-bin-11x11x5inopen-front bin 11 × 11 × 5 in, 2 mm walls, back hook for the bin railSTEP · STL
bin-rail-12inbin rail 12 in: bolts flat to a 1515 face (5/16 holes every 6 in), lip for the bin hooksSTEP · STL
bin-rail-18inbin rail 18 in: bolts flat to a 1515 face (5/16 holes every 6 in), lip for the bin hooksSTEP · STL
bin-rail-24inbin rail 24 in: bolts flat to a 1515 face (5/16 holes every 6 in), lip for the bin hooksSTEP · STL
bin-rail-36inbin rail 36 in: bolts flat to a 1515 face (5/16 holes every 6 in), lip for the bin hooksSTEP · STL
bin-rail-48inbin rail 48 in: bolts flat to a 1515 face (5/16 holes every 6 in), lip for the bin hooksSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=t-slot-parts-bins-and-rail

Parts bins and bin rail for 15-series benches, isometric render of a generated part
Render of bin-rail-12in from the free STEP; not to scale.

Fits with

Questions

Stack?

Hang more rails one bin height apart.