Library › Hardware › Framing ·

T-slot shelf boards for 15-series frames: 8 to 16 in deep, 24 to 48 in wide

What shelf fits a 1515 T-slot bench? · Hardware · basis: Xem Studio design: ¾ in panels with counterbored 5/16-18 holes on the centre lines of 1.5 in rails under each edge

Also called: t slot shelf, 1515 shelf board

Exact dimensions. True size, with no tolerance added.

sizes
16 in table

Notes

  • Sits on a rail at front and back (or on cantilever plates); same hole rule as the bench tops.

T-slot shelf boards for 15-series frames: 8 to 16 in deep, 24 to 48… size chart

width (in)depth (in)holes
2486
3088
3688
48810
24106
30108
36108
481010
24126
30128
36128
481210
24168
301610
361610
481612

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

80/2015 series T-slot profiles and fasteners (1.5 in rail, 5/16-18 hardware)webmaker's catalogue; numbers cited

Free files

★ Free files 16 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
shelf-24x8x0.75in24 × 8 × ¾ in shelf: 6 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-30x8x0.75in30 × 8 × ¾ in shelf: 8 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-36x8x0.75in36 × 8 × ¾ in shelf: 8 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-48x8x0.75in48 × 8 × ¾ in shelf: 10 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-24x10x0.75in24 × 10 × ¾ in shelf: 6 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-30x10x0.75in30 × 10 × ¾ in shelf: 8 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-36x10x0.75in36 × 10 × ¾ in shelf: 8 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-48x10x0.75in48 × 10 × ¾ in shelf: 10 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-24x12x0.75in24 × 12 × ¾ in shelf: 6 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-30x12x0.75in30 × 12 × ¾ in shelf: 8 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-36x12x0.75in36 × 12 × ¾ in shelf: 8 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-48x12x0.75in48 × 12 × ¾ in shelf: 10 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-24x16x0.75in24 × 16 × ¾ in shelf: 8 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-30x16x0.75in30 × 16 × ¾ in shelf: 10 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-36x16x0.75in36 × 16 × ¾ in shelf: 10 counterbored 5/16 holes on the rail centre linesSTEP · STL
shelf-48x16x0.75in48 × 16 × ¾ in shelf: 12 counterbored 5/16 holes on the rail centre linesSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=t-slot-shelf-boards

T-slot shelf boards for 15-series frames: 8 to 16 in deep, 24 to 48 in wide, isometric render of a generated part
Render of shelf-24x12x0.75in from the free STEP; not to scale.

Fits with

Questions

Supports?

Two rails, or the cantilever shelf plates on a post.