Library › Hardware › Frames & stands ·
Shaft stand for a 623 bearing, axis 112 above the foot
What tall stand holds a 623 bearing 112 mm up? · Hardware · basis: 623 bearing (3 × 10 × 4) pocket at the bearing OD; M3 clearance Ø3.4 (ISO 273)
Also called: ltd stirling crank stand, coffee cup stirling bearing stand, 623 stand 45 mm
Long Earth Society build part. The warm-hand demonstrator. Long Earth Society
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 1 in table
Notes
- The bearing stand that holds the LTD engine's Ø3 crankshaft above the top plate: a 40 × 6 upright, 119 tall, with a 28 × 14 arch under it that straddles the plate's bosses, on two 20 × 10 × 3 feet (one 68 mm foot with the arch cut out).
- A Ø10 pocket through the 6 mm upright, 112 mm above the foot's underside, holds a 623 bearing (fit: press). That height is what the con-rod needs to reach a piston inside the 90 mm syringe barrel standing in the top plate.
- Two Ø3.4 holes 54 mm apart in the feet take M3 × 8 screws into the top plate's tapped pads. Two stands carry one crankshaft, with the flywheel between them.
Shaft stand for a 623 bearing, axis 112 above the foot size chart
| part | height | shaft axis | feet | holes | |
|---|---|---|---|---|---|
| ltd-crank-stand-a112 | 119 | 112 | Ø10 × 6 | 68 × 10 × 3 less the 28 arch | 2 × Ø3.4 at 54 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| stand bearing pockets | Ø10 | 623 bearing | press | ltd-crank-stand-* |
| stand foot holes | Ø3.4 | M3 screw clearance (ISO 273) | designed | ltd-crank-stand-* |
| stand arch | 28 × 14 | top-plate bosses (no contact) | designed | ltd-crank-stand-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Wikipedia | Stirling engine | web | CC BY-SA 4.0 (text) |
| James R. Senft | An Introduction to Low Temperature Differential Stirling Engines | book | Moriya Press verify |
| Long Earth Society | Engine builds | web, video | LES site |
Free files
★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| ltd-crank-stand-a112 | crank stand: upright 40 × 6 × 119, Ø10 pocket through it for a 623 with its axis 112 above the foot, 28 × 14 arch under it, 68 × 10 × 3 foot with 2 × Ø3.4 at 54 mm (two per engine) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=tall-shaft-stand-623-bearing

How it fits
Goes in or on
Connects to
Alternatives
Questions
What bearing goes in the LTD crank stand?
A 623 (3 × 10 × 4) in the Ø10 pocket, 112 mm up.
How many stands does the LTD engine use?
Two, 20 mm apart along the Ø3 × 40 crankshaft, with the flywheel between them and a crank disc outside each.