Library › Joinery › Lap & halving joints ·

Tee halving joint (T-lap)

What are the proportions of a tee halving joint? · Hardware · basis: Xem Studio design — geometry computed in the generator from traditional proportions

Also called: tee halving joint, t lap joint, tee lap joint, t halving, junta en T a media madera, T-Überblattung

Exact dimensions. True size, with no tolerance added.

length
80.0 mm
width
60.0 mm
height
20.0 mm

Notes

  • Woodworking joint drawn for 3D printing: the parts lock together by shape, so a print can be joined without glue or screws. Drawn at true size with the parts line to line (zero gap) in their assembled position — add your printer's fit allowance to the mating faces (your AI or slicer can do this).
  • A T-shaped frame joint: the end of one member laps into a half-depth notch in the other.
  • For a tension-proof T, use the dovetail halving joint instead.

Tee halving joint size chart

dimensionvalue
stock20 × 20 mm square
partscross member, end member
notch20 wide × 10 mm deep
end lap20 long × 10 mm
assemblesthe end member drops into the notch from above
holdsracking; the end member can lift unless pinned

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Xem StudioJoinery design (geometry computed in the generator from traditional proportions)webXem Studio design

Free files

★ Free files 3 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
tee-halving-joint-cross-memberThrough member: notch in the top halfSTEP · STL
tee-halving-joint-end-memberEnd member: bottom half removed at its endSTEP · STL
tee-halving-joint-assembledAll parts in their assembled position (each part its own solid)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tee-halving-joint

Tee halving joint (T-lap), isometric render of a generated part
Render of tee-halving-joint-assembled from the free STEP; not to scale.

Fits with

Questions

Does a T-lap resist pulling apart?

No — it only holds sideways; the dovetail halving version locks against pulling out.