Library › Hardware › Heat transfer ·

Thermoelectric (Peltier) modules: TEC1-12706, 12710, 30 mm

What are TEC1-12706 dimensions? · Hardware · basis: Common TEC1 module sizes from manufacturer datasheets (Hebei I.T., Laird equivalents); thickness varies ±0.1 mm by maker

Also called: tec1-12706 dimensions, peltier module size, tec1-12710 thickness, 40x40 peltier, thermoelectric generator size

Long Earth Society build part. ΔT instrument and fan-running TEG on the LES thermoacoustic spools. Long Earth Society

Exact dimensions. True size, with no tolerance added.

sizes
4 in table

Notes

  • TEC1-12706: 40 × 40 × 3.8 mm (127 couples, 6 A, ~60 W heat pumping at ΔT 0); the standard hobby module. TEC1-12710: 40 × 40 × 3.3–3.4 mm, 10 A. 30 × 30 × 3.4 mm modules (TEC1-12704, 03104 class) for small loads. 50 × 50 and 62 × 62 exist for high current.
  • Leads exit one edge (red +, black −); keep 5 mm clear there. Hot and cold faces are the ceramic plates: clamp between heat sinks with thermal paste, 4 × M3 at the heat-sink corners, never over-tighten (ceramic cracks).
  • As a generator (Seebeck) a 12706 gives ~1–2 W at ΔT 100 K; the high-temperature TEG modules (TEG1-12611 etc.) share the 40 × 40 footprint but run to 300 °C.
  • Why it's here: the LES thermoacoustic builds use a 12706 as a ΔT instrument and as a TEG on the cold spool to run the fan.

Thermoelectric (Peltier) modules: TEC1-12706, 12710, 30 mm size chart

modulesize (mm)thickness (mm)i max anote
TEC1-1270640 × 403.86standard hobby module
TEC1-1271040 × 403.410thinner
TEC1-12704 / 0310430 × 303.44small
TEC1-1273062 × 624.830large

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaThermoelectric coolingwebCC BY-SA 4.0 (text)
Hebei I.T. (Shanghai)TEC1-12706 datasheetPDFManufacturer datasheet verify
Long Earth SocietyEngine builds that use these parts (videos and write-ups)web, videoLES site

Free files

★ Free files 3 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
tec1-12706-40x40x3.8TEC1-12706: 40 × 40 × 3.8 mm, 127 couples, 6 A, leads on one edgeSTEP · STL
tec1-12710-40x40x3.4TEC1-12710: 40 × 40 × 3.4 mm (some 3.3), 10 ASTEP · STL
tec1-12704-30x30x3.4TEC1-12704 / 03104 class: 30 × 30 × 3.4 mmSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=thermoelectric-tec1

Thermoelectric (Peltier) modules: TEC1-12706, 12710, 30 mm, isometric render of a generated part
Render of tec1-12706-40x40x3.8 from the free STEP; not to scale.

Fits with

Questions

What are TEC1-12706 dimensions?

40 × 40 × 3.8 mm (±0.1), leads 0.9 mm² on one edge, about 24 g. Fits between any two 40 mm heat sinks.

What is the difference between TEC1-12706 and 12710?

Current rating (6 vs 10 A) and thickness: 3.8 vs 3.3–3.4 mm. Same 40 × 40 footprint.

Can a Peltier module generate power?

Yes, as a Seebeck generator: a 12706 gives roughly 1–2 W at a 100 K temperature difference, enough for a 40 mm fan; dedicated TEG modules tolerate higher temperatures.