Library › Tri-clamp & pipe › Clamp fittings ·

Tri-clamp caps with PG13.5 probe ports (12 mm pH, dissolved O₂ and CO₂ probes): 1½ to 4 in

How do I mount a 12 mm pH probe on a tri-clamp? · Hardware · basis: Xem Studio design on the standard solid cap: PG13.5 (DIN 40430: Ø20.4 major, 1.41 pitch, Ø18.6 core) in a Ø30 boss, drawn as the core bore over 12 mm of thread, Ø12.5 through for the 12 mm probe shaft

Also called: tri clamp ph probe port, pg13.5 tri clamp, 12mm ph probe mount, fermenter ph probe port, tri clamp sensor port

Exact dimensions. True size, with no tolerance added.

sizes
5 in table

Notes

  • Most process probes (pH, ORP, dissolved oxygen, dissolved CO₂, conductivity) are 12 mm shafts with a PG13.5 thread on the head: they screw straight into this port and seal on their own O-ring.
  • Probe length sets how deep the tip reaches below the clamp face; pick the probe so its tip sits in the liquid at your lowest fill.
  • Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

Tri-clamp caps with PG13.5 probe ports (12 mm pH, dissolved O₂ and… size chart

clampportspg major (mm)core (mm)probe (mm)
1–1½120.418.612.0
2120.418.612.0
3220.418.612.0
3320.418.612.0
4320.418.612.0

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

DINDIN 40430 Pg (Panzergewinde) threads: PG13.5 Ø20.4 major, 1.41 pitch (18 tpi), Ø18.6 core; the thread of 12 mm process probes (pH, dissolved O2 / CO2)standardDIN; dimensions are facts verify
GW KentTri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thicknesswebpublisher's guide; dimensions cited
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 5 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
pg13-5-cap-1.5in-x11–1½ in cap with 1 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 throughSTEP · STL
pg13-5-cap-2in-x12 in cap with 1 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 throughSTEP · STL
pg13-5-cap-3in-x23 in cap with 2 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 throughSTEP · STL
pg13-5-cap-3in-x33 in cap with 3 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 throughSTEP · STL
pg13-5-cap-4in-x34 in cap with 3 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 throughSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-pg13-5-probe-ports

Tri-clamp caps with PG13.5 probe ports (12 mm pH, dissolved O₂ and CO₂ probes): 1½ to 4 in, isometric render of a generated part
Render of pg13-5-cap-3in-x2 from the free STEP; not to scale.

Fits with

Questions

Which probes fit?

Any 12 mm probe with a PG13.5 head: most industrial pH, ORP, DO and dissolved-CO₂ probes.