Library › Tri-clamp & pipe › Clamp fittings ·
Tri-clamp screen gaskets: 1½ to 4 in, Ø2 and Ø3 mm perforated plate
Is there a tri-clamp gasket with a screen? · Hardware · basis: Xem Studio design: the ISO 2852 Type B gasket with a 1.0 mm plate across the bore, perforated with Ø2 or Ø3 holes on a hexagonal pitch
Also called: tri clamp screen gasket, tri clamp filter gasket, hop screen tri clamp, 1.5 tri clamp mesh gasket
Exact dimensions. True size, with no tolerance added.
- sizes
- 8 in table
Notes
- A strainer in any clamp joint: catches hops, grain or trub before a pump, valve or hose. Real screen gaskets use woven mesh; this is the printable perforated version.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.
Tri-clamp screen gaskets: 1½ to 4 in, Ø2 and Ø3 mm perforated plate size chart
| size (in) | hole (mm) | pitch (mm) | holes |
|---|---|---|---|
| 1.5 | 2.0 | 3.0 | 85 |
| 1.5 | 3.0 | 4.5 | 37 |
| 2 | 2.0 | 3.0 | 163 |
| 2 | 3.0 | 4.5 | 73 |
| 3 | 2.0 | 3.0 | 439 |
| 3 | 3.0 | 4.5 | 199 |
| 4 | 2.0 | 3.0 | 831 |
| 4 | 3.0 | 4.5 | 367 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| GW Kent | Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness | web | publisher's guide; dimensions cited |
| Rubber Fab | Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) | maker chart; dimensions are facts verify |
Free files
★ Free files 8 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| screen-gasket-1.5in-2mm | 1.5 in screen gasket: Type B gasket with a 1.0 plate, 85 × Ø2 holes at 3.0 pitch | STEP · STL |
| screen-gasket-1.5in-3mm | 1.5 in screen gasket: Type B gasket with a 1.0 plate, 37 × Ø3 holes at 4.5 pitch | STEP · STL |
| screen-gasket-2in-2mm | 2 in screen gasket: Type B gasket with a 1.0 plate, 163 × Ø2 holes at 3.0 pitch | STEP · STL |
| screen-gasket-2in-3mm | 2 in screen gasket: Type B gasket with a 1.0 plate, 73 × Ø3 holes at 4.5 pitch | STEP · STL |
| screen-gasket-3in-2mm | 3 in screen gasket: Type B gasket with a 1.0 plate, 439 × Ø2 holes at 3.0 pitch | STEP · STL |
| screen-gasket-3in-3mm | 3 in screen gasket: Type B gasket with a 1.0 plate, 199 × Ø3 holes at 4.5 pitch | STEP · STL |
| screen-gasket-4in-2mm | 4 in screen gasket: Type B gasket with a 1.0 plate, 831 × Ø2 holes at 3.0 pitch | STEP · STL |
| screen-gasket-4in-3mm | 4 in screen gasket: Type B gasket with a 1.0 plate, 367 × Ø3 holes at 4.5 pitch | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-screen-gaskets

Fits with



Questions
Does it change the joint?
No: same gasket section, the plate sits in the bore at the joint plane.