Library › Tri-clamp & pipe › Clamp fittings ·

Sanitary clamp gaskets, 6 and 8 in (Type B profile)

What size gasket fits a 6 inch tri-clamp? · Standard part · basis: Gasket bead diameter per Rubber Fab (6 in Ø156.5, 8 in Ø207.0); ISO 2852 Type B section (web 1.7, U 5.5, lip 2.8)

Also called: 6 inch tri clamp gasket, 8 inch tri clamp gasket, tri clamp gasket 6 dimensions

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • Type B gaskets for 6 and 8 in clamp joints; the bulges sit in the face grooves on Ø156.5 (6 in) and Ø207.0 (8 in).
  • Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

Sanitary clamp gaskets, 6 and 8 in size chart

size (in)gasket od (mm)bead dia (mm)lip id (mm)
6165.9156.5144.66
8216.7207.0195.46

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
gasket beadØ156.5 (6 in) / Ø207.0 (8 in)groove C2 of the ISO 2852 clamp face on the same sizedesignedgasket-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Rubber FabTri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)PDFpublisher's chart; dimensions cited, nothing copied
GW KentTri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thicknesswebpublisher's guide; dimensions cited
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
gasket-6in6 in Type B gasket (ISO 2852 profile): OD 165.9, web 1.7, bulges on Ø156.5 (5.5 overall), lip ID 144.66 × 2.8 longSTEP · STL
gasket-8in8 in Type B gasket (ISO 2852 profile): OD 216.7, web 1.7, bulges on Ø207 (5.5 overall), lip ID 195.46 × 2.8 longSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-gaskets-6-8in

Sanitary clamp gaskets, 6 and 8 in (Type B profile), isometric render of a generated part
Render of gasket-8in from the free STEP; not to scale.

Fits with

Questions

What bead diameter does a 6 in tri-clamp gasket have?

156.5 mm (6.16 in); 8 in is 207.0 mm (8.15 in).