Library › Tri-clamp & pipe › Vessels ·
Tri-clamp vessel, 8 in: closed-bottom pots 2 to 24 in deep (flat, dished, round)
What sizes of 8 inch tri-clamp pot or closed-end spool are there? · Hardware · basis: Xem Studio design: 8 in sanitary tube Ø203.2 × 2.77 with an ISO 2852 clamp face on top and a welded bottom — flat plate (tube-wall thick), flanged-and-dished (crown R = OD, knuckle 6 %) or hemispherical
Also called: 8 inch tri clamp pot, 8 in tri clamp vessel, 8 inch tri clamp closed end, 8 x 12 tri clamp, tri clamp dish 8 inch, tri clamp cup 8 inch, 8 inch tri clamp fermenter, recipiente tri clamp 8 pulgadas, Tri-Clamp Behälter 8 Zoll
Exact dimensions. True size, with no tolerance added.
- sizes
- 9 in table
Notes
- A 8 in tri-clamp pot: one clamp face, closed bottom. Depth is measured from the clamp face to the outside of the bottom; capacity is to the face plane.
- Every size here is the actual size of the metal part, with no printing allowance. The printable 45° version is printable-tri-clamp-vessel-8in.
- Close it with any cap, dome lid or ported cap of the same size, a clamp and a gasket.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.
Tri-clamp vessel, 8 in: closed-bottom pots 2 to 24 in deep size chart
| depth (in) | depth (mm) | flat L | dished L | round L |
|---|---|---|---|---|
| 2 | 50.8 | 1.47 | 1.08 | — |
| 3 | 76.2 | 2.25 | 1.86 | — |
| 4 | 101.6 | 3.03 | 2.64 | — |
| 6 | 152.4 | 4.59 | 4.2 | 3.58 |
| 8 | 203.2 | 6.15 | 5.76 | 5.14 |
| 10 | 254.0 | 7.71 | 7.32 | 6.7 |
| 12 | 304.8 | 9.27 | 8.87 | 8.26 |
| 18 | 457.2 | 13.94 | 13.55 | 12.93 |
| 24 | 609.6 | 18.62 | 18.23 | 17.61 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| ASME | Flanged and dished (F&D) heads: crown radius = OD, knuckle radius 6 % of OD (BPVC Section VIII torispherical head) | standard | ASME; proportions are facts verify |
| GW Kent | Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness | web | publisher's guide; dimensions cited |
| Rubber Fab | Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676) | publisher's chart; dimensions cited, nothing copied | |
| Rubber Fab | Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) | maker chart; dimensions are facts verify |
Free files
★ Free files 24 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| vessel-8in-x-2in-flat | 8 × 2 in, flat bottom: 50.8 mm face to bottom, holds 1.47 L to the face | STEP · STL |
| vessel-8in-x-2in-dished | 8 × 2 in, dished bottom: 50.8 mm face to bottom, holds 1.08 L to the face | STEP · STL |
| vessel-8in-x-3in-flat | 8 × 3 in, flat bottom: 76.2 mm face to bottom, holds 2.25 L to the face | STEP · STL |
| vessel-8in-x-3in-dished | 8 × 3 in, dished bottom: 76.2 mm face to bottom, holds 1.86 L to the face | STEP · STL |
| vessel-8in-x-4in-flat | 8 × 4 in, flat bottom: 101.6 mm face to bottom, holds 3.03 L to the face | STEP · STL |
| vessel-8in-x-4in-dished | 8 × 4 in, dished bottom: 101.6 mm face to bottom, holds 2.64 L to the face | STEP · STL |
| vessel-8in-x-6in-flat | 8 × 6 in, flat bottom: 152.4 mm face to bottom, holds 4.59 L to the face | STEP · STL |
| vessel-8in-x-6in-dished | 8 × 6 in, dished bottom: 152.4 mm face to bottom, holds 4.20 L to the face | STEP · STL |
| vessel-8in-x-6in-round | 8 × 6 in, round bottom: 152.4 mm face to bottom, holds 3.58 L to the face | STEP · STL |
| vessel-8in-x-8in-flat | 8 × 8 in, flat bottom: 203.2 mm face to bottom, holds 6.15 L to the face | STEP · STL |
| vessel-8in-x-8in-dished | 8 × 8 in, dished bottom: 203.2 mm face to bottom, holds 5.76 L to the face | STEP · STL |
| vessel-8in-x-8in-round | 8 × 8 in, round bottom: 203.2 mm face to bottom, holds 5.14 L to the face | STEP · STL |
| vessel-8in-x-10in-flat | 8 × 10 in, flat bottom: 254.0 mm face to bottom, holds 7.71 L to the face | STEP · STL |
| vessel-8in-x-10in-dished | 8 × 10 in, dished bottom: 254.0 mm face to bottom, holds 7.32 L to the face | STEP · STL |
| vessel-8in-x-10in-round | 8 × 10 in, round bottom: 254.0 mm face to bottom, holds 6.70 L to the face | STEP · STL |
| vessel-8in-x-12in-flat | 8 × 12 in, flat bottom: 304.8 mm face to bottom, holds 9.27 L to the face | STEP · STL |
| vessel-8in-x-12in-dished | 8 × 12 in, dished bottom: 304.8 mm face to bottom, holds 8.87 L to the face | STEP · STL |
| vessel-8in-x-12in-round | 8 × 12 in, round bottom: 304.8 mm face to bottom, holds 8.26 L to the face | STEP · STL |
| vessel-8in-x-18in-flat | 8 × 18 in, flat bottom: 457.2 mm face to bottom, holds 13.94 L to the face | STEP · STL |
| vessel-8in-x-18in-dished | 8 × 18 in, dished bottom: 457.2 mm face to bottom, holds 13.55 L to the face | STEP · STL |
| vessel-8in-x-18in-round | 8 × 18 in, round bottom: 457.2 mm face to bottom, holds 12.93 L to the face | STEP · STL |
| vessel-8in-x-24in-flat | 8 × 24 in, flat bottom: 609.6 mm face to bottom, holds 18.62 L to the face | STEP · STL |
| vessel-8in-x-24in-dished | 8 × 24 in, dished bottom: 609.6 mm face to bottom, holds 18.23 L to the face | STEP · STL |
| vessel-8in-x-24in-round | 8 × 24 in, round bottom: 609.6 mm face to bottom, holds 17.61 L to the face | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-vessel-8in

Fits with








Questions
How much does a 8 × 12 in tri-clamp pot hold?
9.27 L with a flat bottom.
Which bottom should I choose?
Flat stands on a bench; dished (F&D) is the usual tank bottom and stands on a ring; round drains to one point.