Library › Tri-clamp & pipe › Clamp fittings ·

Tri-clamp end caps with ports: NPT, clamp nozzle, hose barb and airlock hole, 1½ to 8 in

Is there a tri-clamp cap with a ½ inch NPT port? · Hardware · basis: Xem Studio design on the standard solid cap (16AMP thickness per size): ports are ASME B16.11 Class 3000 half couplings tapped to B1.20.1 (drawn as the tap-drill bore), 1½ in clamp nozzles, a ½ in hose barb (14MPHR barb profile) or a plain Ø12.7 hole

Also called: tri clamp cap with npt, tri clamp end cap 1/2 fnpt, tri clamp lid with ports, tri clamp airlock cap, tri clamp blow off cap, 6 inch tri clamp lid with port

Exact dimensions. True size, with no tolerance added.

sizes
7 in table

Notes

  • Lids that take something: a thermometer or pressure gauge (¼ or ½ NPT), a ball-lock post or valve, a 1½ in clamp for a thermowell, airlock or spunding valve, a blow-off hose, or an airlock grommet.
  • Ports are welded half couplings on the real part; here they are one solid with the cap.
  • Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

Tri-clamp end caps with ports: NPT, clamp nozzle, hose barb and… size chart

sizeflange od (mm)cap (mm)
1–1½50.56.35
264.06.35
2½77.56.35
391.06.35
4119.07.92
6166.911.1
8217.712.19

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ASMEB1.20.1 Pipe threads, general purpose (NPT): major diameter, L2, tap drill; B16.11 forged fittings (Class 3000 couplings); B36.10 Sch 40 borestandardASME; dimensions are facts verify
GW KentTri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thicknesswebpublisher's guide; dimensions cited
Dixon14MPHR brewery hose barb: A and barb OD B (hose ID + 0.040 in) per size, ½ to 6 inPDFpublisher's catalogue; dimensions cited
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 42 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
cap-1.5in-1-8npt1–1½ in cap with a ⅛ FNPT half coupling at the centre (tap-drill Ø8.6)STEP · STL
cap-1.5in-1-4npt1–1½ in cap with a ¼ FNPT half coupling at the centre (tap-drill Ø11.1)STEP · STL
cap-1.5in-grommet-hole-12.71–1½ in cap with a Ø12.7 (½ in) hole for an airlock grommetSTEP · STL
cap-1.5in-half-in-barb1–1½ in cap with a ½ in hose barb (blow-off)STEP · STL
cap-2in-1-8npt2 in cap with a ⅛ FNPT half coupling at the centre (tap-drill Ø8.6)STEP · STL
cap-2in-1-4npt2 in cap with a ¼ FNPT half coupling at the centre (tap-drill Ø11.1)STEP · STL
cap-2in-1-2npt2 in cap with a ½ FNPT half coupling at the centre (tap-drill Ø18.3)STEP · STL
cap-2in-3-4npt2 in cap with a ¾ FNPT half coupling at the centre (tap-drill Ø23.4)STEP · STL
cap-2in-3x1-4npt2 in cap with three ¼ FNPT half couplings on r 10.7STEP · STL
cap-2in-grommet-hole-12.72 in cap with a Ø12.7 (½ in) hole for an airlock grommetSTEP · STL
cap-2in-half-in-barb2 in cap with a ½ in hose barb (blow-off)STEP · STL
cap-2.5in-1-8npt2½ in cap with a ⅛ FNPT half coupling at the centre (tap-drill Ø8.6)STEP · STL
cap-2.5in-1-4npt2½ in cap with a ¼ FNPT half coupling at the centre (tap-drill Ø11.1)STEP · STL
cap-2.5in-1-2npt2½ in cap with a ½ FNPT half coupling at the centre (tap-drill Ø18.3)STEP · STL
cap-2.5in-3-4npt2½ in cap with a ¾ FNPT half coupling at the centre (tap-drill Ø23.4)STEP · STL
cap-3in-1-8npt3 in cap with a ⅛ FNPT half coupling at the centre (tap-drill Ø8.6)STEP · STL
cap-3in-1-4npt3 in cap with a ¼ FNPT half coupling at the centre (tap-drill Ø11.1)STEP · STL
cap-3in-1-2npt3 in cap with a ½ FNPT half coupling at the centre (tap-drill Ø18.3)STEP · STL
cap-3in-3-4npt3 in cap with a ¾ FNPT half coupling at the centre (tap-drill Ø23.4)STEP · STL
cap-3in-3x1-4npt3 in cap with three ¼ FNPT half couplings on r 16.4STEP · STL
cap-3in-1.5in-port3 in cap with a 1½ in clamp nozzle at the centre, 1 in tallSTEP · STL
cap-4in-1-8npt4 in cap with a ⅛ FNPT half coupling at the centre (tap-drill Ø8.6)STEP · STL
cap-4in-1-4npt4 in cap with a ¼ FNPT half coupling at the centre (tap-drill Ø11.1)STEP · STL
cap-4in-1-2npt4 in cap with a ½ FNPT half coupling at the centre (tap-drill Ø18.3)STEP · STL
cap-4in-3-4npt4 in cap with a ¾ FNPT half coupling at the centre (tap-drill Ø23.4)STEP · STL
cap-4in-3x1-4npt4 in cap with three ¼ FNPT half couplings on r 21.9STEP · STL
cap-4in-1.5in-port4 in cap with a 1½ in clamp nozzle at the centre, 1 in tallSTEP · STL
cap-4in-1.5in-port-and-1-2npt4 in cap with a 1½ in clamp nozzle and a ½ FNPT half couplingSTEP · STL
cap-6in-1-8npt6 in cap with a ⅛ FNPT half coupling at the centre (tap-drill Ø8.6)STEP · STL
cap-6in-1-4npt6 in cap with a ¼ FNPT half coupling at the centre (tap-drill Ø11.1)STEP · STL
cap-6in-1-2npt6 in cap with a ½ FNPT half coupling at the centre (tap-drill Ø18.3)STEP · STL
cap-6in-3-4npt6 in cap with a ¾ FNPT half coupling at the centre (tap-drill Ø23.4)STEP · STL
cap-6in-3x1-4npt6 in cap with three ¼ FNPT half couplings on r 33.0STEP · STL
cap-6in-1.5in-port6 in cap with a 1½ in clamp nozzle at the centre, 1 in tallSTEP · STL
cap-6in-1.5in-port-and-1-2npt6 in cap with a 1½ in clamp nozzle and a ½ FNPT half couplingSTEP · STL
cap-8in-1-8npt8 in cap with a ⅛ FNPT half coupling at the centre (tap-drill Ø8.6)STEP · STL
cap-8in-1-4npt8 in cap with a ¼ FNPT half coupling at the centre (tap-drill Ø11.1)STEP · STL
cap-8in-1-2npt8 in cap with a ½ FNPT half coupling at the centre (tap-drill Ø18.3)STEP · STL
cap-8in-3-4npt8 in cap with a ¾ FNPT half coupling at the centre (tap-drill Ø23.4)STEP · STL
cap-8in-3x1-4npt8 in cap with three ¼ FNPT half couplings on r 44.5STEP · STL
cap-8in-1.5in-port8 in cap with a 1½ in clamp nozzle at the centre, 1 in tallSTEP · STL
cap-8in-1.5in-port-and-1-2npt8 in cap with a 1½ in clamp nozzle and a ½ FNPT half couplingSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-ported-end-caps

Tri-clamp end caps with ports: NPT, clamp nozzle, hose barb and airlock hole, 1½ to 8 in, isometric render of a generated part
Render of cap-4in-1-8npt from the free STEP; not to scale.

Fits with

Questions

Which cap for an airlock?

The 1½ in or 2 in cap with the Ø12.7 hole takes a ½ in airlock grommet; or use a 1½ in clamp port and an airlock cap on it.

Which cap for a thermometer?

A ½ NPT port takes a ½ NPT bimetal thermometer or a thermowell; or use a tri-clamp thermowell on a clamp port.