Library › Tri-clamp & pipe › Clamp fittings ·

Tri-clamp vessels with a dished or round welded bottom: 4, 6 and 8 in, 12 to 24 in deep

What does a 6 inch × 18 inch tri-clamp vessel with a rounded bottom look like? · Hardware · basis: Xem Studio design: sanitary tube (4 in 4.000 × 0.083, 6 in 6.000 × 0.109, 8 in 8.000 × 0.109) with a clamp face on top and a welded head on the bottom: flanged-and-dished (crown radius = OD, knuckle 6 % of OD) or hemispherical

Also called: 6 inch tri clamp fermenter, tri clamp pot, 6 x 18 tri clamp vessel, tri clamp closed end spool rounded bottom, sanitary vessel dished bottom, tri clamp brew kettle

Exact dimensions. True size, with no tolerance added.

sizes
3 in table

Notes

  • A closed pot made from sanitary tube: welded bottom, clamp face on top, so any cap, dome lid, thermowell cap or ported cap of the same size closes it. The 6 in × 18 in is a small fermenter or brew pot; depth is measured from the clamp face to the outside of the bottom.
  • Dished (F&D) bottoms are shallow and stand on a ring; round bottoms are deeper and drain to one point.
  • Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

Tri-clamp vessels with a dished or round welded bottom: 4, 6 and 8… size chart

size (in)tube od (mm)wall (mm)dished bottom h (mm)round bottom h (mm)depths (in)
4101.62.1117.250.812, 18, 24
6152.42.7725.876.212, 18, 24
8203.22.7734.4101.612, 18, 24

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ASMEFlanged and dished (F&D) heads: crown radius = OD, knuckle radius 6 % of OD (BPVC Section VIII torispherical head)standardASME; proportions are facts verify
GW KentTri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thicknesswebpublisher's guide; dimensions cited
Rubber FabTri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)PDFpublisher's chart; dimensions cited, nothing copied
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 18 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
vessel-4in-x-12in-dished4 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 17.2 high; tube 101.6 × 2.11; holds about 2.14 L in the straight partSTEP · STL
vessel-4in-x-12in-round4 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), round (hemispherical) bottom 50.8 high; tube 101.6 × 2.11; holds about 1.89 L in the straight partSTEP · STL
vessel-4in-x-18in-dished4 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 17.2 high; tube 101.6 × 2.11; holds about 3.28 L in the straight partSTEP · STL
vessel-4in-x-18in-round4 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), round (hemispherical) bottom 50.8 high; tube 101.6 × 2.11; holds about 3.03 L in the straight partSTEP · STL
vessel-4in-x-24in-dished4 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 17.2 high; tube 101.6 × 2.11; holds about 4.41 L in the straight partSTEP · STL
vessel-4in-x-24in-round4 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), round (hemispherical) bottom 50.8 high; tube 101.6 × 2.11; holds about 4.16 L in the straight partSTEP · STL
vessel-6in-x-12in-dished6 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 25.8 high; tube 152.4 × 2.77; holds about 4.73 L in the straight partSTEP · STL
vessel-6in-x-12in-round6 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), round (hemispherical) bottom 76.2 high; tube 152.4 × 2.77; holds about 3.87 L in the straight partSTEP · STL
vessel-6in-x-18in-dished6 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 25.8 high; tube 152.4 × 2.77; holds about 7.31 L in the straight partSTEP · STL
vessel-6in-x-18in-round6 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), round (hemispherical) bottom 76.2 high; tube 152.4 × 2.77; holds about 6.45 L in the straight partSTEP · STL
vessel-6in-x-24in-dished6 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 25.8 high; tube 152.4 × 2.77; holds about 9.89 L in the straight partSTEP · STL
vessel-6in-x-24in-round6 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), round (hemispherical) bottom 76.2 high; tube 152.4 × 2.77; holds about 9.04 L in the straight partSTEP · STL
vessel-8in-x-12in-dished8 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 34.4 high; tube 203.2 × 2.77; holds about 8.30 L in the straight partSTEP · STL
vessel-8in-x-12in-round8 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), round (hemispherical) bottom 101.6 high; tube 203.2 × 2.77; holds about 6.24 L in the straight partSTEP · STL
vessel-8in-x-18in-dished8 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 34.4 high; tube 203.2 × 2.77; holds about 12.97 L in the straight partSTEP · STL
vessel-8in-x-18in-round8 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), round (hemispherical) bottom 101.6 high; tube 203.2 × 2.77; holds about 10.91 L in the straight partSTEP · STL
vessel-8in-x-24in-dished8 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 34.4 high; tube 203.2 × 2.77; holds about 17.65 L in the straight partSTEP · STL
vessel-8in-x-24in-round8 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), round (hemispherical) bottom 101.6 high; tube 203.2 × 2.77; holds about 15.59 L in the straight partSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-dished-bottom-vessels

Tri-clamp vessels with a dished or round welded bottom: 4, 6 and 8 in, 12 to 24 in deep, isometric render of a generated part
Render of vessel-6in-x-18in-round from the free STEP; not to scale.

Fits with

Questions

How deep is the dished bottom on a 6 in vessel?

25.8 mm from the tangent line; the round bottom is 76.2 mm.

What closes the top?

Any 6 in tri-clamp cap or lid with a 6 in clamp and gasket: a flat cap, a dome lid, or a ported cap for a thermowell, airlock or hose barb.