Library › Hardware › Gears, cranks & flywheels ·

Beam pivot post, 60 mm

What post holds the pivot of a rocker beam? · Hardware · basis: Ø3 pin hole (fit: press); M3 clearance Ø3.4 (ISO 273)

Also called: beam pivot post, rocker pivot stand, walking beam pivot

Long Earth Society build part. Frame for the LES 2 in gamma on 2020. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
5 in table

Notes

  • A 16 × 10 upright 60 tall on a 30 × 16 × 4 foot.
  • A Ø3 hole through the 10 mm upright, 54 mm up (fit: press), takes the pivot pin that the rocker beam's 623 turns on.
  • Two Ø3.4 holes 22 mm apart in the foot take M3 screws to the base.

Beam pivot post, 60 mm size chart

parametervalue
height60
upright16 × 10
foot30 × 16 × 4
pin holeØ3 at 54
foot holes2 × Ø3.4 at 22

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
pivot-post pin holeØ3Ø3 pivot pinpresspivot-post-*
pivot-post foot holesØ3.4M3 screw clearancedesignedpivot-post-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaBeam enginewebCC BY-SA 4.0 (text)
WikipediaStirling enginewebCC BY-SA 4.0 (text)
Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
pivot-post-60beam pivot post 60 mm, Ø3 pin hole (exact), 2 × M3 clearance (Ø3.4) footSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=beam-pivot-post

Beam pivot post, 60 mm, isometric render of a generated part
Render of pivot-post-60 from the free STEP; not to scale.

Questions

How high is the beam pivot?

54 mm above the foot's underside.

What pin goes in the pivot post?

A Ø3 pin pressed in the hole; the rocker beam's 623 turns on it.