Library › Hardware › Gears, cranks & flywheels ·

Built-up crank webs for Ø8 shafts and Ø6 crank pins (two-throw cranks at 90°)

How do I build a two-throw crankshaft with ball-bearing con-rods? · Hardware · basis: Design values; Ø6 dowel crank pins (ISO 8734)

Also called: built up crankshaft, crank web 8 mm shaft

Long Earth Society build part. The cranks of my performance engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
7 in table

Notes

  • Discs pressed on Ø8 shafts with Ø6 dowel crank pins pressed through them: the horizontal gamma's crank has four webs (two throws, 76.2 mm apart, a shaft between) and the beta's has two webs and a link web between the two con-rods (the shaft does not pass the con-rods).
  • Pin radius 15 for the displacer (30 stroke) and 18 for the piston (36 stroke); the pins are a quarter turn apart, the displacer leading.

Built-up crank webs for Ø8 shafts and Ø6 crank pins size chart

partthicknesspin radius
crank-web-56x10-r151015
crank-web-56x11-r151115
crank-web-56x11-r181118
crank-web-56x10-r181018
crank-web-56x8-r18818
crank-web-56x8-r15815
link-web-14-r18-r15-901418 / 15

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
shaft holeØ8Ø8 crank shaftpresscrank-web*
pin holesØ6Ø6 dowel crank pinspressall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 8 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
crank-web-56x10-r15crank web Ø56 × 10: Ø8 shaft hole, Ø6 pin hole at r 15 (both press), two Ø11 lightening holes beside the pin (counterweight)STEP · STL
crank-web-56x11-r15crank web Ø56 × 11: Ø8 shaft hole, Ø6 pin hole at r 15 (both press), two Ø11 lightening holes beside the pin (counterweight)STEP · STL
crank-web-56x11-r18crank web Ø56 × 11: Ø8 shaft hole, Ø6 pin hole at r 18 (both press), two Ø11 lightening holes beside the pin (counterweight)STEP · STL
crank-web-56x10-r18crank web Ø56 × 10: Ø8 shaft hole, Ø6 pin hole at r 18 (both press), two Ø11 lightening holes beside the pin (counterweight)STEP · STL
crank-web-56x8-r18crank web Ø56 × 8: Ø8 shaft hole, Ø6 pin hole at r 18 (both press), two Ø11 lightening holes beside the pin (counterweight)STEP · STL
crank-web-56x8-r15crank web Ø56 × 8: Ø8 shaft hole, Ø6 pin hole at r 15 (both press), two Ø11 lightening holes beside the pin (counterweight)STEP · STL
crank-web-56x12-r15crank web Ø56 × 12: Ø8 shaft hole, Ø6 pin hole at r 15 (both press), two Ø11 lightening holes beside the pin (counterweight)STEP · STL
link-web-14-r18-r15-90link web 14 thick: Ø6 press holes for the piston pin (r 18) and the displacer pin (r 15, 90° on)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=built-up-crank-webs-8mm

Built-up crank webs for Ø8 shafts and Ø6 crank pins (two-throw cranks at 90°), isometric render of a generated part
Render of crank-web-56x8-r18 from the free STEP; not to scale.

Fits with

Questions

Which way does it turn?

The way that brings the displacer pin to each point a quarter turn before the piston pin.