Library › Hardware › Magnets, plates & discs ·

Chamber rings Ø100 and Ø150 × 20

What ring makes a shallow 100 or 150 mm chamber between two plates? · Hardware · basis: Chamber height 20: an 8 mm displacer at 10 mm stroke (crank-disc-b3-stroke10) with 1 mm at each end; M3 tap drill Ø2.5

Also called: ltd stirling chamber ring, coffee cup stirling cylinder, ltd displacer chamber size, low temperature stirling ring stl

Long Earth Society build part. The warm-hand demonstrator. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • The wall of the LTD displacer chamber, between the bottom and top plates. Bore Ø100 or Ø150, 20 tall, 10 mm wall (outside Ø120 / Ø170).
  • Six Ø2.5 holes (M3 tap drill) through its height on a Ø112 / Ø162 circle: an M3 × 12 comes in from each plate.
  • The displacer runs inside with a 2 mm radial gap by design; nothing moving touches the ring.

Chamber rings Ø100 and Ø150 × 20 size chart

fileboreoutsideheightscrew circle
ltd-100-chamber-ring-h2010012020112
ltd-150-chamber-ring-h2015017020162

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
chamber-ring screw holesØ2.5 throughM3 tap drill (an M3 × 12 from each plate)designedltd-100-chamber*
chamber-ring screw holesØ2.5 throughM3 tap drill (an M3 × 12 from each plate)designedltd-150-chamber*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaStirling enginewebCC BY-SA 4.0 (text)
James R. SenftAn Introduction to Low Temperature Differential Stirling EnginesbookMoriya Press verify
Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
ltd-100-chamber-ring-h20chamber ring Ø100 bore × 20 tall, 10 mm wall, 6 × Ø2.5 (M3 tapped) through on a Ø112 circle; the displacer runs insideSTEP · STL
ltd-150-chamber-ring-h20chamber ring Ø150 bore × 20 tall, 10 mm wall, 6 × Ø2.5 (M3 tapped) through on a Ø162 circle; the displacer runs insideSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=chamber-rings-100-150

Chamber rings Ø100 and Ø150 × 20, isometric render of a generated part
Render of ltd-100-chamber-ring-h20 from the free STEP; not to scale.

Questions

How tall is the chamber of the LTD Stirling engine here?

20 mm, for an 8 mm thick displacer moving 10 mm: 1 mm to spare at each end.

What displacer goes in the Ø100 chamber ring?

The Ø96 × 8 LTD displacer: 2 mm radial gap, designed.