Library › Hardware › Pistons, cylinders & rods ·
Flat discs Ø96 × 8 and Ø146 × 8 on a rod
What thin disc fits a 100 or 150 mm chamber on a rod? · Hardware · basis: Senft LTD rule: displacer diameter ≫ stroke; diameter = chamber bore − 4 (2 mm radial gap, designed)
Also called: ltd stirling displacer size, coffee cup stirling displacer, 96 mm displacer, low temperature stirling displacer dimensions
Long Earth Society build part. The warm-hand demonstrator. Long Earth Society
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 2 in table
Notes
- The wide, thin displacer of the LTD engine: a solid disc Ø96 × 8 for the Ø100 chamber or Ø146 × 8 for the Ø150, with a Ø2 hole at x −5 (under the top plate's rod guide) for the 2 mm rod.
- The 2 mm radial gap to the chamber wall is designed: air passes round the edge as the displacer moves.
- In the 20 mm chamber it moves 10 mm; at Ø96 that sweeps about 72 mL.
Flat discs Ø96 × 8 and Ø146 × 8 on a rod size chart
| file | diameter | thickness | chamber | radial gap | rod hole |
|---|---|---|---|---|---|
| ltd-100-displacer | 96 | 8 | 100 | 2 | 2 |
| ltd-150-displacer | 146 | 8 | 150 | 2 | 2 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| displacer rod hole | Ø2 | 2 mm rod | press | ltd-100-displacer* |
| displacer rod hole | Ø2 | 2 mm rod | press | ltd-150-displacer* |
| displacer to chamber gap | 2 radial (Ø D−4 in Ø D) | chamber ring bore | designed | ltd-100-displacer* |
| displacer to chamber gap | 2 radial (Ø D−4 in Ø D) | chamber ring bore | designed | ltd-150-displacer* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Wikipedia | Stirling engine | web | CC BY-SA 4.0 (text) |
| James R. Senft | An Introduction to Low Temperature Differential Stirling Engines | book | Moriya Press verify |
| Long Earth Society | Engine builds | web, video | LES site |
Free files
★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| ltd-100-displacer | displacer Ø96 × 8 with a Ø2 rod hole at x -5 under the top plate's guide (2 mm radial gap to the Ø100 chamber: designed) | STEP · STL |
| ltd-150-displacer | displacer Ø146 × 8 with a Ø2 rod hole at x -5 under the top plate's guide (2 mm radial gap to the Ø150 chamber: designed) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=flat-discs-on-rod-96-146

How it fits
Goes in or on
Connects to
Also needed
You might also need
Questions
What size displacer for a coffee cup Stirling engine?
Ø96 × 8 in a Ø100 × 20 chamber at 10 mm stroke on the engine here; Ø146 × 8 in the Ø150 chamber.
Why is an LTD displacer so wide and thin?
With a 15–20 K difference the pressure swing is small, so it needs a large area moved a short way with little friction.
