Library › Hardware › Magnets, plates & discs ·

Bottom plates Ø120 and Ø170

What round base plates go with a 100 or 150 mm ring? · Hardware · basis: Same outline and M3 hole circle as the LTD top plate and chamber ring; M3 clearance Ø3.4 (ISO 273)

Also called: ltd stirling bottom plate, coffee cup stirling hot plate size, ltd plate 120 mm, low temperature stirling base plate

Long Earth Society build part. The warm-hand demonstrator. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • The hot plate of the LTD engine: the cup or the hand warms it and the heat goes through it into the air in the chamber.
  • Ø120 × 3 for the 100 chamber, Ø170 × 3 for the 150, with 6 × Ø3.4 on a Ø112 / Ø162 circle (at 30°, 90°, …) matching the chamber ring and top plate; an M3 × 12 from below goes into each tapped ring hole.

Bottom plates Ø120 and Ø170 size chart

fileplateholesscrew circlecentre mark
ltd-100-bottom-plateØ120 × 36 × Ø3.41123.2
ltd-150-bottom-plateØ170 × 36 × Ø3.41623.2

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
plate screw holesØ3.4M3 screw clearance (ISO 273)designedltd-100-bottom*
plate screw holesØ3.4M3 screw clearance (ISO 273)designedltd-150-bottom*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaStirling enginewebCC BY-SA 4.0 (text)
James R. SenftAn Introduction to Low Temperature Differential Stirling EnginesbookMoriya Press verify
Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
ltd-100-bottom-platebottom (hot) plate Ø120 × 3, 6 × Ø3.4 (M3 clearance) on a Ø112 circle at 30° + 60° stepsSTEP · STL
ltd-150-bottom-platebottom (hot) plate Ø170 × 3, 6 × Ø3.4 (M3 clearance) on a Ø162 circle at 30° + 60° stepsSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=round-bottom-plates-120-170

Bottom plates Ø120 and Ø170, isometric render of a generated part
Render of ltd-100-bottom-plate from the free STEP; not to scale.

You might also need

Questions

How big is the bottom plate of a 100 mm LTD Stirling?

Ø120 × 3 with six Ø3.4 holes on a Ø112 circle.

Does the bottom plate have the same holes as the top plate?

Yes: 6 × Ø3.4 on the same Ø112 / Ø162 circle as the top plate; the chamber ring between them has the same holes tapped M3.